All MIBs › HP-ICF-MACNOTIFY-MIB › hpicfMacNotifyRemovedPortConfig
hpicfMacNotifyRemovedPortConfig
Module: HP-ICF-MACNOTIFY-MIB
OID (symbolic): HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyRemovedPortConfig
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.66.1.5
Node type: OBJECT-TYPE
Type: PortList
Access: read-write
Description: Used to configure the MAC address removed notification traps on specific ports.
Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is enabled to send traps for removed MAC addresses; the port is not enabled if its bit has a value of '0'.
Enabling hpicfMacNotifyRemovedPortConfig on a trunk port is permitted but not recommended.
hpicfMacNotifyEnable must be enabled for traps to be sent.
What is hpicfMacNotifyRemovedPortConfig?
A per-port bitmap selecting which switch ports send traps when a MAC address is removed from the table on them, using the same one-bit-per-port encoding as hpicfMacNotifyLearnedPortConfig. Enabling it on trunk ports is permitted but discouraged due to trap volume.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.66.1.5 snmpwalk -v2c -c public <target> HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyRemovedPortConfig
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.66.1.5.1 snmpget -v2c -c public <target> HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyRemovedPortConfig.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.66.1.5.1 s <value>
Start monitoring HP ProCurve/Aruba switch (MAC address change notification traps) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyRemovedPortConfig OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba switch (MAC address change notification traps) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.66 | hpicfMacNotifyMIB | HP-ICF-MACNOTIFY-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.66.1 | hpicfMacNotifyConfigObjects | HP-ICF-MACNOTIFY-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.66.1.5 | hpicfMacNotifyRemovedPortConfig | HP-ICF-MACNOTIFY-MIB |