All MIBs › HP-ICF-MACNOTIFY-MIB › hpicfMacNotifyPortLearnedCountConfig
hpicfMacNotifyPortLearnedCountConfig
Module: HP-ICF-MACNOTIFY-MIB
OID (symbolic): HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyPortLearnedCountConfig
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.66.5.2
Node type: OBJECT-TYPE
Type: PortList
Access: read-write
Description: Used to config the MAC address learned notification traps on specific ports.
Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is enabled to send traps for learned MAC addresses;the port is not enabled if its bit has a value of '0'.
Enabling picfMacNotifyPortLearnedCountConfig on a trunk port is permitted but not recommended.
hpicfMacNotifyPortLearnedCountEnable must be enabled for traps to be sent.
What is hpicfMacNotifyPortLearnedCountConfig?
A per-port bitmap selecting which ports participate in the MAC-learned-count threshold notification feature, using the same one-bit-per-port encoding as the other port-config bitmaps in this MIB.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.66.5.2 snmpwalk -v2c -c public <target> HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyPortLearnedCountConfig
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.66.5.2.1 snmpget -v2c -c public <target> HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyPortLearnedCountConfig.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.66.5.2.1 s <value>
Start monitoring HP ProCurve/Aruba switch (MAC address change notification traps) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyPortLearnedCountConfig OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba switch (MAC address change notification traps) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.66 | hpicfMacNotifyMIB | HP-ICF-MACNOTIFY-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.66.5 | hpicfMacCountNotifyConfigObjects | HP-ICF-MACNOTIFY-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.66.5.2 | hpicfMacNotifyPortLearnedCountConfig | HP-ICF-MACNOTIFY-MIB |