All MIBs › HP-ICF-MACNOTIFY-MIB › hpicfMacNotifyClearMacTableOnPorts
hpicfMacNotifyClearMacTableOnPorts
Module: HP-ICF-MACNOTIFY-MIB
OID (symbolic): HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyClearMacTableOnPorts
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.66.4.1
Node type: OBJECT-TYPE
Type: PortList
Access: read-write
Description: Used to clear the MAC address table on a specific port. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port is represented by a single bit within the value of this object. If that bit has a value of '1 then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
What is hpicfMacNotifyClearMacTableOnPorts?
Writing a port bitmap here clears the MAC address table entries learned on the specified ports, using the same one-bit-per-port encoding as the notification config bitmaps. An admin would use this to force relearning on a port after a suspected stale or spoofed entry.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.66.4.1 snmpwalk -v2c -c public <target> HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyClearMacTableOnPorts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.66.4.1.1 snmpget -v2c -c public <target> HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyClearMacTableOnPorts.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.66.4.1.1 s <value>
Start monitoring HP ProCurve/Aruba switch (MAC address change notification traps) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyClearMacTableOnPorts OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba switch (MAC address change notification traps) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.66 | hpicfMacNotifyMIB | HP-ICF-MACNOTIFY-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.66.4 | hpicfMacNotifyClearObjects | HP-ICF-MACNOTIFY-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.66.4.1 | hpicfMacNotifyClearMacTableOnPorts | HP-ICF-MACNOTIFY-MIB |