All MIBs › HP-ICF-MACNOTIFY-MIB › hpicfMacNotifyAgedPortConfig
hpicfMacNotifyAgedPortConfig
Module: HP-ICF-MACNOTIFY-MIB
OID (symbolic): HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyAgedPortConfig
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.66.1.11
Node type: OBJECT-TYPE
Type: PortList
Access: read-write
Description: This object is used to configure the ports for sending traps when MAC addresses age out.
Each octet within this value specifies a set of eight ports.The first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16 and so on . Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. A bitvalue of (1) indicates that the corresponding port is enabled to send traps for aged MAC addresses. A bitvalue of (0) indicates that the corresponding port is not enabled to send traps for aged MAC addresses.
Enabling hpicfMacNotifyAgedPortConfig on a trunk port is permitted but not recommended.
hpicfMacNotifyEnable must be enabled for traps to be sent.
What is hpicfMacNotifyAgedPortConfig?
A per-port bitmap selecting which ports send traps when a MAC address ages out of the table on them, using the same one-bit-per-port encoding as the learned/removed port config objects.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.66.1.11 snmpwalk -v2c -c public <target> HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyAgedPortConfig
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.66.1.11.1 snmpget -v2c -c public <target> HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyAgedPortConfig.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.66.1.11.1 s <value>
Start monitoring HP ProCurve/Aruba switch (MAC address change notification traps) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyAgedPortConfig OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba switch (MAC address change notification traps) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.66 | hpicfMacNotifyMIB | HP-ICF-MACNOTIFY-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.66.1 | hpicfMacNotifyConfigObjects | HP-ICF-MACNOTIFY-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.66.1.11 | hpicfMacNotifyAgedPortConfig | HP-ICF-MACNOTIFY-MIB |