All MIBs › HP-ICF-LMA-MIB › hpicfLmaSessionState
hpicfLmaSessionState
Module: HP-ICF-LMA-MIB
OID (symbolic): HP-ICF-LMA-MIB::hpicfLmaSessionState
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.97.1.2.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Specifies the state of the client as follows: 'authenticated' - authenticated client 'unauthenticated' - unauthenticated client, waiting for credentials 'authenticating' - credentials have been sent for verification, waiting for response 'authReqRejectNoVlan' - credentials invalid; client does not have access to unauthenticated VLAN 'authReqRejectUnauthVlan' - credentials invalid; client does have access to unauthenticated VLAN 'authReqTimeoutNoVlan' - credentials could not be verified; client is still unauthenticated and does not have access to unauthenticated VLAN 'authReqTimeoutUnauthVlan' - credentials could not be verified; client is still unauthenticated, but has access to unauthenticated VLAN 'initialRole' - client is assigned the initial role 'initialRoleFailed' - initial role could not be applied; client does not have access to the network
What is hpicfLmaSessionState?
Reports where a given client's authentication attempt currently stands on this port — authenticated, unauthenticated, authenticating, one of several reject/timeout states (with or without unauthenticated-VLAN access), or an initial-role state when role-based authorization is used. An admin reads this per client to diagnose exactly why a device isn't getting network access rather than just seeing a generic pass/fail.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.97.1.2.1.1.2 snmpwalk -v2c -c public <target> HP-ICF-LMA-MIB::hpicfLmaSessionState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.97.1.2.1.1.2.1 snmpget -v2c -c public <target> HP-ICF-LMA-MIB::hpicfLmaSessionState.1
Start monitoring HP ProCurve switch (Local MAC Authentication port security) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-LMA-MIB::hpicfLmaSessionState OID value, configure state conditions and alerts, and monitor any HP ProCurve switch (Local MAC Authentication port security) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.97 | hpicfLmaMIB | HP-ICF-LMA-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.97.1 | hpicfLmaObjects | HP-ICF-LMA-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.97.1.2 | hpicfLmaStatsObjects | HP-ICF-LMA-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.97.1.2.1 | hpicfLmaSessionStatsTable | HP-ICF-LMA-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.97.1.2.1.1 | hpicfLmaSessionStatsEntry | HP-ICF-LMA-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.97.1.2.1.1.2 | hpicfLmaSessionState | HP-ICF-LMA-MIB |