All MIBs › HP-ICF-LAYER3VLAN-MIB › hpicfLayer3VlanStatus
hpicfLayer3VlanStatus
Module: HP-ICF-LAYER3VLAN-MIB
OID (symbolic): HP-ICF-LAYER3VLAN-MIB::hpicfLayer3VlanStatus
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.70.1.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The object contains the desired adminStatus of layer 3 on a VLAN. If set to 'enable' then layer 3(IPv4/IPv6) is enabled on that VLAN. If set to 'disable' then layer 3 is disabled on that VLAN.
What is hpicfLayer3VlanStatus?
This setting turns Layer 3 (IPv4/IPv6) routing on or off for a specific VLAN on an HP switch or router, toggling between the values enable(1) and disable(2). An administrator uses it to control whether a given VLAN behaves as a routed interface with its own IP presence or stays purely at Layer 2, defaulting to enabled unless changed. For example, setting it to disable(2) on VLAN 20 would stop that VLAN from routing traffic while leaving switching within the VLAN unaffected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.70.1.1.1.1 snmpwalk -v2c -c public <target> HP-ICF-LAYER3VLAN-MIB::hpicfLayer3VlanStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.70.1.1.1.1.1 snmpget -v2c -c public <target> HP-ICF-LAYER3VLAN-MIB::hpicfLayer3VlanStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.70.1.1.1.1.1 i <value>
Start monitoring HP ProCurve/Aruba switch (Layer 3 VLAN interface enable/config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-LAYER3VLAN-MIB::hpicfLayer3VlanStatus OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba switch (Layer 3 VLAN interface enable/config) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.70 | hpicfLayer3VlanConfigMIB | HP-ICF-LAYER3VLAN-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.70.1 | hpicfLayer3VlanConfig | HP-ICF-LAYER3VLAN-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.70.1.1 | hpicfLayer3VlanConfigTable | HP-ICF-LAYER3VLAN-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.70.1.1.1 | hpicfLayer3VlanConfigEntry | HP-ICF-LAYER3VLAN-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.70.1.1.1.1 | hpicfLayer3VlanStatus | HP-ICF-LAYER3VLAN-MIB |