All MIBs › HP-ICF-JOB-SCHEDULER-MIB › hpicfJobSchedulerEvent
hpicfJobSchedulerEvent
Module: HP-ICF-JOB-SCHEDULER-MIB
OID (symbolic): HP-ICF-JOB-SCHEDULER-MIB::hpicfJobSchedulerEvent
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.8
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: A set of events that will cause this job to run.
reboot - the job is run as soon as possible after the device boots.
failover - the job is executed after failover to a standby management module. This event only applies to devices that have a standby module and is ignored on other devices.
The Calendar schedule objects below are ignored when any event bit is set in this object.
What is hpicfJobSchedulerEvent?
This BITS object sets which events, reboot(0) or failover(1), will trigger a job to run immediately, causing the calendar-based schedule objects to be ignored whenever any event bit is set. An admin uses this to run a job automatically right after a device reboots or after a failover to a standby management module, rather than on a fixed schedule. For example, an admin might set the reboot(0) bit so a configuration verification job runs automatically every time the switch restarts.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.8 snmpwalk -v2c -c public <target> HP-ICF-JOB-SCHEDULER-MIB::hpicfJobSchedulerEvent
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.8.1 snmpget -v2c -c public <target> HP-ICF-JOB-SCHEDULER-MIB::hpicfJobSchedulerEvent.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.8.1 s <value>
Start monitoring HP ProCurve/Aruba switch (internal scheduled-job/CLI automation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-JOB-SCHEDULER-MIB::hpicfJobSchedulerEvent OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba switch (internal scheduled-job/CLI automation) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.105 | hpicfJobSchedulerMIB | HP-ICF-JOB-SCHEDULER-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.105.1 | hpicfJobSchedulerObjects | HP-ICF-JOB-SCHEDULER-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1 | hpicfJobSchedulerTable | HP-ICF-JOB-SCHEDULER-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1 | hpicfJobSchedulerEntry | HP-ICF-JOB-SCHEDULER-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.8 | hpicfJobSchedulerEvent | HP-ICF-JOB-SCHEDULER-MIB |