All MIBs › HP-ICF-IPv6-DYNAMIC-LOCKDOWN-MIB › hpicfDIPLDv6PortOperStatus
hpicfDIPLDv6PortOperStatus
Module: HP-ICF-IPv6-DYNAMIC-LOCKDOWN-MIB
OID (symbolic): HP-ICF-IPv6-DYNAMIC-LOCKDOWN-MIB::hpicfDIPLDv6PortOperStatus
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.103.1.1.2.1.2
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: This object indicates the various states of the current operating mode of Dynamic IPv6 Lockdown on this port. The states are: active - Dynamic IPv6 Lockdown is active on this port. noDsnoop - Dynamic IPv6 Lockdown is enabled on this port, but DHCPv6 Snooping is not globally enabled. trustedPort - Dynamic IPv6 Lockdown is enabled on this port, but is not active because the port is a DHCPv6 Snooping trusted port. noSnoopingVlan - Dynamic IPv6 Lockdown is enabled on this port, but is not active because the port is not a member of any VLAN with DHCPv6 Snooping enabled.
What is hpicfDIPLDv6PortOperStatus?
Bitmask showing why Dynamic IPv6 Lockdown is or isn't actually enforcing on this port: active(0) means it's working, while noDsnoopv6(1), trustedPort(2), or noSnoopingVlan(3) explain why it's enabled but not actually active (DHCPv6 Snooping off globally, port marked trusted, or port not on a snooping-enabled VLAN). Check this when lockdown is configured on a port but traffic isn't being filtered as expected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.103.1.1.2.1.2 snmpwalk -v2c -c public <target> HP-ICF-IPv6-DYNAMIC-LOCKDOWN-MIB::hpicfDIPLDv6PortOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.103.1.1.2.1.2.1 snmpget -v2c -c public <target> HP-ICF-IPv6-DYNAMIC-LOCKDOWN-MIB::hpicfDIPLDv6PortOperStatus.1
Start monitoring HP ProCurve/Aruba switch (DHCPv6 snooping/IPv6 dynamic lockdown) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-IPv6-DYNAMIC-LOCKDOWN-MIB::hpicfDIPLDv6PortOperStatus OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba switch (DHCPv6 snooping/IPv6 dynamic lockdown) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.103 | hpicfIpv6Lockdown | HP-ICF-IPv6-DYNAMIC-LOCKDOWN-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.103.1 | hpicfDIPLDv6Objects | HP-ICF-IPv6-DYNAMIC-LOCKDOWN-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.103.1.1 | hpicfDIPLDv6Config | HP-ICF-IPv6-DYNAMIC-LOCKDOWN-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.103.1.1.2 | hpicfDIPLDv6PortTable | HP-ICF-IPv6-DYNAMIC-LOCKDOWN-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.103.1.1.2.1 | hpicfDIPLDv6PortEntry | HP-ICF-IPv6-DYNAMIC-LOCKDOWN-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.103.1.1.2.1.2 | hpicfDIPLDv6PortOperStatus | HP-ICF-IPv6-DYNAMIC-LOCKDOWN-MIB |