All MIBs › HP-ICF-IP-LOCKDOWN-MIB › hpicfIpLockPortOperStatus
hpicfIpLockPortOperStatus
Module: HP-ICF-IP-LOCKDOWN-MIB
OID (symbolic): HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockPortOperStatus
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.1.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: This object indicates the various states of the current operating mode of Dynamic IP Lockdown on this port. When no bits are set, the status of this feature shall be 'disabled'. Each status is described below: active - Dynamic IP Lockdown is active on this port. noDsnoop - Dynamic IP Lockdown is enabled on this port, but DHCP Snooping is not globally enabled. trustedPort - Dynamic IP Lockdown is enabled on this port, but is not active because the port is a DHCP Snooping trusted port. noSnoopingVlan - Dynamic IP Lockdown is enabled on this port, but is not active because the port is not a member of any VLAN with DHCP Snooping enabled.
What is hpicfIpLockPortOperStatus?
A bitmask reporting why Dynamic IP Lockdown is or isn't actually active on this port: active means it's enforcing, while noDsnoop, trustedPort, or noSnoopingVlan each explain a specific reason enforcement isn't happening despite being enabled (DHCP snooping off globally, port is a snooping-trusted port, or the port's VLAN has snooping disabled). An admin reads this bitmask to diagnose why Lockdown isn't blocking traffic on a port where it was expected to.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.1.1.1 snmpwalk -v2c -c public <target> HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockPortOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.1.1.1.1 snmpget -v2c -c public <target> HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockPortOperStatus.1
Start monitoring HP ProCurve switch (Dynamic IP Lockdown, anti-spoofing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockPortOperStatus OID value, configure state conditions and alerts, and monitor any HP ProCurve switch (Dynamic IP Lockdown, anti-spoofing) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.39 | hpicfIpLockdown | HP-ICF-IP-LOCKDOWN-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.39.1 | hpicfIpLockObjects | HP-ICF-IP-LOCKDOWN-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.39.1.2 | hpicfIpLockStatus | HP-ICF-IP-LOCKDOWN-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.1 | hpicfIpLockPortStatusTable | HP-ICF-IP-LOCKDOWN-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.1.1 | hpicfIpLockPortStatusEntry | HP-ICF-IP-LOCKDOWN-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.1.1.1 | hpicfIpLockPortOperStatus | HP-ICF-IP-LOCKDOWN-MIB |