All MIBs › HP-ICF-FAULT-FINDER-MIB › hpicfFfWarnTolerance
hpicfFfWarnTolerance
Module: HP-ICF-FAULT-FINDER-MIB
OID (symbolic): HP-ICF-FAULT-FINDER-MIB::hpicfFfWarnTolerance
OID (numeric): 1.3.6.1.4.1.11.2.14.11.1.7.1.1.3
Node type: OBJECT-TYPE
Type: HpicfFaultTolerance
Access: read-write
Description: The tolerance level used to calculate the fault warning threshold for this fault type.
The agent will periodically check relevant statistics for each port for each type of fault. If the warning threshold has been exceeded, and fault warning action is enabled for that fault type, an hpicfFaultFinderTrap notification will be sent. In addition, an entry will be made in the hpicfFfLogTable for the fault. Once a fault warning has fired, a hysteresis mechanism assures that another warning will not be fired until the relevant counter drops below a hysteresis threshold value.
What is hpicfFfWarnTolerance?
The tolerance level used to compute the warning threshold for this fault type; once exceeded (with warning action enabled) the agent sends a trap and logs the fault, then won't fire again until the underlying counter drops below a hysteresis level.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.7.1.1.3 snmpwalk -v2c -c public <target> HP-ICF-FAULT-FINDER-MIB::hpicfFfWarnTolerance
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.7.1.1.3.1 snmpget -v2c -c public <target> HP-ICF-FAULT-FINDER-MIB::hpicfFfWarnTolerance.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.1.7.1.1.3.1 s <value>
Start monitoring HP ProCurve web-managed switch (automated cabling/port fault detection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-FAULT-FINDER-MIB::hpicfFfWarnTolerance OID value, configure state conditions and alerts, and monitor any HP ProCurve web-managed switch (automated cabling/port fault detection) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.1 | hpicfCommon | HP-ICF |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.1.7 | hpicfFaultFinder | HP-ICF-FAULT-FINDER-MIB |
| 1.3.6.1.4.1.11.2.14.11.1.7.1 | hpicfFfControlTable | HP-ICF-FAULT-FINDER-MIB |
| 1.3.6.1.4.1.11.2.14.11.1.7.1.1 | hpicfFfControlEntry | HP-ICF-FAULT-FINDER-MIB |
| 1.3.6.1.4.1.11.2.14.11.1.7.1.1.3 | hpicfFfWarnTolerance | HP-ICF-FAULT-FINDER-MIB |