All MIBs › HP-ICF-FAULT-FINDER-MIB › hpicfFfSpeedReduceTolerance
hpicfFfSpeedReduceTolerance
Module: HP-ICF-FAULT-FINDER-MIB
OID (symbolic): HP-ICF-FAULT-FINDER-MIB::hpicfFfSpeedReduceTolerance
OID (numeric): 1.3.6.1.4.1.11.2.14.11.1.7.1.1.5
Node type: OBJECT-TYPE
Type: HpicfFaultTolerance
Access: read-write
Description: The tolerance level used to calculate the speed reduction threshold for this fault type. The value of an instance of this object MUST be greater than the value of the corresponding instance of the hpicfFfWarnTolerance, and less than or equal to the corresponding instance of hpicfFfDisablePortTolerance.
The agent will only reduce speed on a port if auto-negotiation has been performed, and the partners link abilities allow operation at a slower media speed.
The agent will periodically check relevant statistics for each port for each type of fault. If the speed reduction threshold has been exceeded, and speed reduction option is enabled for that fault type, an hpicfFaultFinderTrap notification will be sent. In addition, an entry will be made in the hpicfFfLogTable for the fault.
The agent may elect not to reduce speed or delay speed reduction of certain ports. For example, it may choose to delay taking action on a cascade port to give the cascaded device a chance to correct the problem.
What is hpicfFfSpeedReduceTolerance?
The tolerance level used to compute the speed-reduction threshold for this fault type; it must sit between hpicfFfWarnTolerance and hpicfFfDisablePortTolerance, and only takes effect on ports where auto-negotiation allows dropping to a slower speed instead of disabling the link entirely.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.7.1.1.5 snmpwalk -v2c -c public <target> HP-ICF-FAULT-FINDER-MIB::hpicfFfSpeedReduceTolerance
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.7.1.1.5.1 snmpget -v2c -c public <target> HP-ICF-FAULT-FINDER-MIB::hpicfFfSpeedReduceTolerance.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.1.7.1.1.5.1 s <value>
Start monitoring HP ProCurve web-managed switch (automated cabling/port fault detection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-FAULT-FINDER-MIB::hpicfFfSpeedReduceTolerance OID value, configure state conditions and alerts, and monitor any HP ProCurve web-managed switch (automated cabling/port fault detection) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.1 | hpicfCommon | HP-ICF |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.1.7 | hpicfFaultFinder | HP-ICF-FAULT-FINDER-MIB |
| 1.3.6.1.4.1.11.2.14.11.1.7.1 | hpicfFfControlTable | HP-ICF-FAULT-FINDER-MIB |
| 1.3.6.1.4.1.11.2.14.11.1.7.1.1 | hpicfFfControlEntry | HP-ICF-FAULT-FINDER-MIB |
| 1.3.6.1.4.1.11.2.14.11.1.7.1.1.5 | hpicfFfSpeedReduceTolerance | HP-ICF-FAULT-FINDER-MIB |