All MIBs › HP-ICF-FAULT-FINDER-MIB › hpicfFfAction
hpicfFfAction
Module: HP-ICF-FAULT-FINDER-MIB
OID (symbolic): HP-ICF-FAULT-FINDER-MIB::hpicfFfAction
OID (numeric): 1.3.6.1.4.1.11.2.14.11.1.7.1.1.2
Node type: OBJECT-TYPE
Type: HpicfFaultAction
Access: read-write
Description: This object is used to configure the action, if any, to be taken if a fault of this type is detected by the agent. Setting an instance of this object to 'none' will clear any previous state of the associated fault on all ports.
This object is used to enable or disable the port disable feature for this fault type. Setting this object to 'warnAndDisable' will enable the port disable feature for this fault type. This feature is intended to allow an agent to disable ports that are being disruptive to the rest of the network.
Note that not all agents will support setting this object to 'warnAndDisable'. The agent may choose not to disable a particular port for a particular fault based on its knowledge of if/how that fault disrupts the network.
What is hpicfFfAction?
Configures what the Fault Finder does when it detects a given fault type: take no action (clearing state for that fault on all ports), warn only, or warn and automatically disable the offending port. An admin enables warnAndDisable for fault types where automatically isolating a disruptive port is worth the risk of a false positive.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.7.1.1.2 snmpwalk -v2c -c public <target> HP-ICF-FAULT-FINDER-MIB::hpicfFfAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.7.1.1.2.1 snmpget -v2c -c public <target> HP-ICF-FAULT-FINDER-MIB::hpicfFfAction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.1.7.1.1.2.1 s <value>
Start monitoring HP ProCurve web-managed switch (automated cabling/port fault detection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-FAULT-FINDER-MIB::hpicfFfAction OID value, configure state conditions and alerts, and monitor any HP ProCurve web-managed switch (automated cabling/port fault detection) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.1 | hpicfCommon | HP-ICF |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.1.7 | hpicfFaultFinder | HP-ICF-FAULT-FINDER-MIB |
| 1.3.6.1.4.1.11.2.14.11.1.7.1 | hpicfFfControlTable | HP-ICF-FAULT-FINDER-MIB |
| 1.3.6.1.4.1.11.2.14.11.1.7.1.1 | hpicfFfControlEntry | HP-ICF-FAULT-FINDER-MIB |
| 1.3.6.1.4.1.11.2.14.11.1.7.1.1.2 | hpicfFfAction | HP-ICF-FAULT-FINDER-MIB |