All MIBs › HP-ICF-DHCPCLIENT-MIB › hpicfDhcpClientVendorSpecOptionStatus
hpicfDhcpClientVendorSpecOptionStatus
Module: HP-ICF-DHCPCLIENT-MIB
OID (symbolic): HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientVendorSpecOptionStatus
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.57.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This flag indicates whether DHCP vendor specific configurations are enabled for this interface or not.
Setting this flag to 'enabled' (the default) results in sending 'Vendor Class Identifier'(VCI) to DHCP server and requesting vendor specific configurations from DHCP servers for this interface. Refer to RFC 2132 for more details.
Setting this flag to 'disabled' results in not sending VCI to DHCP server and not requesting vendor specific configurations from DHCP servers.
What is hpicfDhcpClientVendorSpecOptionStatus?
This flag controls whether the device sends its Vendor Class Identifier and requests vendor-specific configuration options from DHCP servers on an interface. Admins enable this, the default, so the device can receive vendor-tailored settings from a DHCP server that supports RFC 2132 vendor options; disabling it stops that exchange. A network requiring vendor-specific auto-provisioning would need hpicfDhcpClientVendorSpecOptionStatus left at enable(1) for the device to receive those settings via DHCP.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.57.1.1 snmpwalk -v2c -c public <target> HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientVendorSpecOptionStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.57.1.1.1 snmpget -v2c -c public <target> HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientVendorSpecOptionStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.57.1.1.1 i <value>
Start monitoring HP ProCurve/Aruba switch (management-interface DHCP client) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientVendorSpecOptionStatus OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba switch (management-interface DHCP client) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.57 | hpicfDhcpClient | HP-ICF-DHCPCLIENT-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.57.1 | hpicfDhcpClientOptions | HP-ICF-DHCPCLIENT-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.57.1.1 | hpicfDhcpClientVendorSpecOptionStatus | HP-ICF-DHCPCLIENT-MIB |