All MIBs › HP-ICF-CONNECTION-RATE-FILTER › hpicfConnectionRateFilterIfModeValue
hpicfConnectionRateFilterIfModeValue
Module: HP-ICF-CONNECTION-RATE-FILTER
OID (symbolic): HP-ICF-CONNECTION-RATE-FILTER::hpicfConnectionRateFilterIfModeValue
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.24.4.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This variable identifies the mode applied to the host flagged by the connection rate filter.
What is hpicfConnectionRateFilterIfModeValue?
This read-write INTEGER (none(0)/inform(1)/throttle(2)/block(3)), indexed by ifIndex and defaulting to none, configures the mode applied to hosts flagged by the connection rate filter on a specific interface. An admin sets this per interface to decide how aggressively to respond when a host connected on that port is flagged for an abnormal connection rate — logging only, slowing it down, or blocking it. For example, an admin might set this to block(3) on an untrusted access port to automatically cut off hosts exhibiting suspicious connection-flood behavior on that port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.24.4.1.1.1 snmpwalk -v2c -c public <target> HP-ICF-CONNECTION-RATE-FILTER::hpicfConnectionRateFilterIfModeValue
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.24.4.1.1.1.1 snmpget -v2c -c public <target> HP-ICF-CONNECTION-RATE-FILTER::hpicfConnectionRateFilterIfModeValue.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.24.4.1.1.1.1 i <value>
Start monitoring HP ProCurve managed switch (Connection Rate Filter, worm/DoS mitigation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-CONNECTION-RATE-FILTER::hpicfConnectionRateFilterIfModeValue OID value, configure state conditions and alerts, and monitor any HP ProCurve managed switch (Connection Rate Filter, worm/DoS mitigation) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.24 | hpicfConnectionRateFilter | HP-ICF-CONNECTION-RATE-FILTER |
| 1.3.6.1.4.1.11.2.14.11.5.1.24.4 | hpicfConnectionRateFilterIfModeConfig | HP-ICF-CONNECTION-RATE-FILTER |
| 1.3.6.1.4.1.11.2.14.11.5.1.24.4.1 | hpicfConnectionRateFilterIfModeConfigTable | HP-ICF-CONNECTION-RATE-FILTER |
| 1.3.6.1.4.1.11.2.14.11.5.1.24.4.1.1 | hpicfConnectionRateFilterIfModeConfigEntry | HP-ICF-CONNECTION-RATE-FILTER |
| 1.3.6.1.4.1.11.2.14.11.5.1.24.4.1.1.1 | hpicfConnectionRateFilterIfModeValue | HP-ICF-CONNECTION-RATE-FILTER |