All MIBs › HP-ENTITY-POWER-MIB › hpEntPowerCurrentPowerUsage
hpEntPowerCurrentPowerUsage
Module: HP-ENTITY-POWER-MIB
OID (symbolic): HP-ENTITY-POWER-MIB::hpEntPowerCurrentPowerUsage
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.71.1.1.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This MIB object returns the current power usage of this entity. For entities that cannot be set to function in a low power mode, the value returned by this object would be the same as that of entPowerMaxPowerUsage. For entities that are set to function in a low power mode, the value returned would be the same as that of entPowerMinPowerUsage.
What is hpEntPowerCurrentPowerUsage?
This reports the entity's actual power draw, in watts, right now -- matching its max rating if the component can't run in a reduced-power mode, or its min rating if it's currently configured for low power. An admin monitors this in real time to track actual power consumption across the chassis, useful for capacity planning or identifying components drawing more than expected. A reading of 150 watts on a component whose max is also 150 confirms it's running at full power since it has no lower-power operating mode.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.71.1.1.1.3 snmpwalk -v2c -c public <target> HP-ENTITY-POWER-MIB::hpEntPowerCurrentPowerUsage
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.71.1.1.1.3.1 snmpget -v2c -c public <target> HP-ENTITY-POWER-MIB::hpEntPowerCurrentPowerUsage.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hpEntPowerCurrentPowerUsage.1
Start monitoring HP networking switch/chassis with redundant or PoE power supplies with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ENTITY-POWER-MIB::hpEntPowerCurrentPowerUsage OID value, configure state conditions and alerts, and monitor any HP networking switch/chassis with redundant or PoE power supplies from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.71 | hpEntityPowerMIB | HP-ENTITY-POWER-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.71.1 | hpEntPowerObjects | HP-ENTITY-POWER-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.71.1.1 | hpEntPowerTable | HP-ENTITY-POWER-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.71.1.1.1 | hpEntPowerEntry | HP-ENTITY-POWER-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.71.1.1.1.3 | hpEntPowerCurrentPowerUsage | HP-ENTITY-POWER-MIB |