All MIBs › HP-AUTH-MIB › hpSwitchTacacsAuthKeyEncrypted
hpSwitchTacacsAuthKeyEncrypted
Module: HP-AUTH-MIB
OID (symbolic): HP-AUTH-MIB::hpSwitchTacacsAuthKeyEncrypted
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.16.3.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: An encrypted form of the key used in encrypting the packets passed between the TACACS+ server and the client. This key must match the one configured on the server. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpSwitchTacacsAuthKey and hpSwitchTacacsAuthKeyEncrypted may be set in any transaction. This object should only be written with an encrypted key previously read from a compatible HP Networking device.
What is hpSwitchTacacsAuthKeyEncrypted?
This holds an already-encrypted form of the TACACS+ shared secret, usable only when hpSwitchAuthenticationEncryptCredentialsMethod is set to something other than none. Only one of this object and the plaintext hpSwitchTacacsAuthKey may be set in a single transaction. The DESCRIPTION warns it should only be written with a value previously read back from a compatible HP device, i.e. it is meant for config replication, not for typing a new key directly.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.16.3.3 snmpwalk -v2c -c public <target> HP-AUTH-MIB::hpSwitchTacacsAuthKeyEncrypted
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.16.3.3.1 snmpget -v2c -c public <target> HP-AUTH-MIB::hpSwitchTacacsAuthKeyEncrypted.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.16.3.3.1 s <value>
Start monitoring HP ProCurve/Aruba (ICF-based) switch (802.1X/MAC authentication) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-AUTH-MIB::hpSwitchTacacsAuthKeyEncrypted OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba (ICF-based) switch (802.1X/MAC authentication) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.16 | hpSwitchAuthenticationMIB | HP-AUTH-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.3 | hpSwitchTacacsConfig | HP-AUTH-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.3.3 | hpSwitchTacacsAuthKeyEncrypted | HP-AUTH-MIB |