All MIBs › HP-AUTH-MIB › hpSwitchServerNewRSAKeyOperation
hpSwitchServerNewRSAKeyOperation
Module: HP-AUTH-MIB
OID (symbolic): HP-AUTH-MIB::hpSwitchServerNewRSAKeyOperation
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.16.13.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object when will returns a value either 'useInstalled'(1) or 'createBits1024'(4). The value 'useInstalled'(1) is returned when a certificate RSA key already exists on switch. The value 'createBits1024'(4) is returned when no certificate RSA key exists on switch.
When user configuresthe values, the value triggers the following action:
'useInstalled' - The switch will use the currently configured RSA key that is already present on the switch.
'createBits512' - This value is deprecated and no longer supported.
'createBits768' - This value is deprecated and no longer supported.
'createBits1024' - This value specifies the creation of a new RSA key of length 1024-bit.
'createBits2048' - This value specifies the creation of a new RSA key of length 2048-bit.
What is hpSwitchServerNewRSAKeyOperation?
This is an action object that controls RSA key generation for the SSL server certificate: useInstalled(1) reuses the existing key, and createBits1024(4)/createBits2048(5) generate a new key of that length; the 512- and 768-bit options are present in the SYNTAX but explicitly marked deprecated and no longer supported. Reading it back shows useInstalled(1) if a key already exists on the switch, or createBits1024(4) if none does yet. An admin sets createBits2048 for a stronger key before requesting a new CA-signed or self-signed certificate.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.16.13.2 snmpwalk -v2c -c public <target> HP-AUTH-MIB::hpSwitchServerNewRSAKeyOperation
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.16.13.2.1 snmpget -v2c -c public <target> HP-AUTH-MIB::hpSwitchServerNewRSAKeyOperation.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.16.13.2.1 i <value>
Start monitoring HP ProCurve/Aruba (ICF-based) switch (802.1X/MAC authentication) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-AUTH-MIB::hpSwitchServerNewRSAKeyOperation OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba (ICF-based) switch (802.1X/MAC authentication) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.16 | hpSwitchAuthenticationMIB | HP-AUTH-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.13 | hpSwitchCertConfig | HP-AUTH-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.13.2 | hpSwitchServerNewRSAKeyOperation | HP-AUTH-MIB |