All MIBs › HP-AUTH-MIB › hpSwitchAuthPwdRepeatCharactersCheck
hpSwitchAuthPwdRepeatCharactersCheck
Module: HP-AUTH-MIB
OID (symbolic): HP-AUTH-MIB::hpSwitchAuthPwdRepeatCharactersCheck
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.16.25.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object enables the check that the password does not contain at least three of the same characters used consecutively.
What is hpSwitchAuthPwdRepeatCharactersCheck?
When enabled, the switch rejects a new password that has three or more of the same character used consecutively (e.g. "aaa1234"). An admin enables this to block weak, low-entropy passwords built from repeated characters.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.16.25.3 snmpwalk -v2c -c public <target> HP-AUTH-MIB::hpSwitchAuthPwdRepeatCharactersCheck
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.16.25.3.1 snmpget -v2c -c public <target> HP-AUTH-MIB::hpSwitchAuthPwdRepeatCharactersCheck.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.16.25.3.1 i <value>
Start monitoring HP ProCurve/Aruba (ICF-based) switch (802.1X/MAC authentication) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-AUTH-MIB::hpSwitchAuthPwdRepeatCharactersCheck OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba (ICF-based) switch (802.1X/MAC authentication) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.16 | hpSwitchAuthenticationMIB | HP-AUTH-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.25 | hpSwitchAuthenticationPasswordConfig | HP-AUTH-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.25.3 | hpSwitchAuthPwdRepeatCharactersCheck | HP-AUTH-MIB |