All MIBs › HP-AUTH-MIB › hpSwitchAuthLockoutDelay
hpSwitchAuthLockoutDelay
Module: HP-AUTH-MIB
OID (symbolic): HP-AUTH-MIB::hpSwitchAuthLockoutDelay
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.16.1.4
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The number of seconds after repeated login failures before a user may again attempt login, and the period within which login rate is limited. When the value is set 0, the login rate limit feature is disabled.
What is hpSwitchAuthLockoutDelay?
This is the number of seconds a user must wait after repeated failed logins before being allowed to try again, and also the window over which the login-attempt count (hpSwitchNumLoginAttempts) is measured. Setting it to 0 disables the login rate-limiting/lockout feature entirely. An admin tunes this to slow down brute-force login attempts against the switch's management interfaces.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.16.1.4 snmpwalk -v2c -c public <target> HP-AUTH-MIB::hpSwitchAuthLockoutDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.16.1.4.1 snmpget -v2c -c public <target> HP-AUTH-MIB::hpSwitchAuthLockoutDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.16.1.4.1 i <value>
Start monitoring HP ProCurve/Aruba (ICF-based) switch (802.1X/MAC authentication) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-AUTH-MIB::hpSwitchAuthLockoutDelay OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba (ICF-based) switch (802.1X/MAC authentication) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.16 | hpSwitchAuthenticationMIB | HP-AUTH-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.1 | hpSwitchAuthenticationConfig | HP-AUTH-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.1.4 | hpSwitchAuthLockoutDelay | HP-AUTH-MIB |