All MIBs › HMIOMODULE-SNMP-MIB › hmIOModConfigDigOutputSourceIP
hmIOModConfigDigOutputSourceIP
Module: HMIOMODULE-SNMP-MIB
OID (symbolic): HMIOMODULE-SNMP-MIB::hmIOModConfigDigOutputSourceIP
OID (numeric): 1.3.6.1.4.1.248.14.1.13.1.3.1.5
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: The IP address of an input mirrored to the output. Use 0.0.0.0 if the output should not be set. In this case hmIOModOutputValue is invalid (3). Use 127.0.0.1 if an local input should be used.
What is hmIOModConfigDigOutputSourceIP?
This object sets the IP address of the device whose digital input value should be mirrored to this output, with 0.0.0.0 meaning the output is not driven by any source (leaving its value invalid) and 127.0.0.1 meaning a local input on this same device should be used. Admins configure this to link a remote or local input's state to a physical output on this IO module. For example, setting hmIOModConfigDigOutputSourceIP to 127.0.0.1 mirrors a local input's high or low state directly onto this output without needing a remote SNMP poll.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.14.1.13.1.3.1.5 snmpwalk -v2c -c public <target> HMIOMODULE-SNMP-MIB::hmIOModConfigDigOutputSourceIP
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.14.1.13.1.3.1.5.1 snmpget -v2c -c public <target> HMIOMODULE-SNMP-MIB::hmIOModConfigDigOutputSourceIP.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.14.1.13.1.3.1.5.1 a <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hmIOModConfigDigOutputSourceIP.1
Start monitoring Hirschmann industrial Ethernet switch with digital I/O expansion module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HMIOMODULE-SNMP-MIB::hmIOModConfigDigOutputSourceIP OID value, configure state conditions and alerts, and monitor any Hirschmann industrial Ethernet switch with digital I/O expansion module from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HIRSCHMANN-GENERIC-ERROR-MIB |
| 1.3.6.1.4.1.248.14 | hmConfiguration | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1 | hmChassis | HMPRIV-MGMT-SNMP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.14.1.13 | hmIOModuleGroup | HMIOMODULE-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1.13.1 | hmIOModuleConfigGroup | HMIOMODULE-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1.13.1.3 | hmIOModConfigDigOutputTable | HMIOMODULE-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1.13.1.3.1 | hmIOModConfigDigOutputEntry | HMIOMODULE-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1.13.1.3.1.5 | hmIOModConfigDigOutputSourceIP | HMIOMODULE-SNMP-MIB |