All MIBs › HMIOMODULE-SNMP-MIB › hmIOModConfigDigOutputRetryCount
hmIOModConfigDigOutputRetryCount
Module: HMIOMODULE-SNMP-MIB
OID (symbolic): HMIOMODULE-SNMP-MIB::hmIOModConfigDigOutputRetryCount
OID (numeric): 1.3.6.1.4.1.248.14.1.13.1.1.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The retry count for the output values. when after the number of configured retries no SNMP get request was answered, the output value (hmIOModOutputValue) will be set to invalid (3). Minimum 1, Maximum 10.
What is hmIOModConfigDigOutputRetryCount?
This object sets how many times the device retries an SNMP get request when polling a mirrored input source for an output value, before giving up and marking the output as invalid(3), ranging from 1 to 10 with a default of 3. Admins tune this to control how tolerant the system is of transient network or polling failures before flagging an output as unreliable. For example, raising this to 5 gives the device more attempts to reach a flaky remote input source before it marks the corresponding output value invalid.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.14.1.13.1.1.5 snmpwalk -v2c -c public <target> HMIOMODULE-SNMP-MIB::hmIOModConfigDigOutputRetryCount
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.14.1.13.1.1.5.1 snmpget -v2c -c public <target> HMIOMODULE-SNMP-MIB::hmIOModConfigDigOutputRetryCount.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.14.1.13.1.1.5.1 i <value>
Start monitoring Hirschmann industrial Ethernet switch with digital I/O expansion module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HMIOMODULE-SNMP-MIB::hmIOModConfigDigOutputRetryCount OID value, configure state conditions and alerts, and monitor any Hirschmann industrial Ethernet switch with digital I/O expansion module from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HIRSCHMANN-GENERIC-ERROR-MIB |
| 1.3.6.1.4.1.248.14 | hmConfiguration | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1 | hmChassis | HMPRIV-MGMT-SNMP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.14.1.13 | hmIOModuleGroup | HMIOMODULE-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1.13.1 | hmIOModuleConfigGroup | HMIOMODULE-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1.13.1.1 | hmIOModConfigCommon | HMIOMODULE-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1.13.1.1.5 | hmIOModConfigDigOutputRetryCount | HMIOMODULE-SNMP-MIB |