All MIBs › HMIOMODULE-SNMP-MIB › hmIOModConfigDigInputSnmpTrap
hmIOModConfigDigInputSnmpTrap
Module: HMIOMODULE-SNMP-MIB
OID (symbolic): HMIOMODULE-SNMP-MIB::hmIOModConfigDigInputSnmpTrap
OID (numeric): 1.3.6.1.4.1.248.14.1.13.1.2.1.4
Node type: OBJECT-TYPE
Type: HmEnabledStatus
Access: read-write
Description: Trigger an SNMP trap log when input status changes. If the value is disable (2), no SNMP trap will be sent. If the value is enable (1), a SNMP trap will be sent when the input state changes. The SNMP trap will be sent to all receivers configured in hmAgentSnmpTrapReceiverConfigTable. The input state will be checked acording to the refresh interval entered in hmIOModConfigDigInputRefreshInterval.
What is hmIOModConfigDigInputSnmpTrap?
This object controls whether the device sends an SNMP trap to all configured trap receivers whenever this specific digital input's state changes, checked according to the configured input refresh interval. Admins enable(1) this on inputs that need real-time alerting, such as a door or alarm contact, so a management station is immediately notified of a state change. For example, enabling hmIOModConfigDigInputSnmpTrap on a critical input ensures an SNMP trap fires the moment that input transitions from low to high.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.14.1.13.1.2.1.4 snmpwalk -v2c -c public <target> HMIOMODULE-SNMP-MIB::hmIOModConfigDigInputSnmpTrap
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.14.1.13.1.2.1.4.1 snmpget -v2c -c public <target> HMIOMODULE-SNMP-MIB::hmIOModConfigDigInputSnmpTrap.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.14.1.13.1.2.1.4.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hmIOModConfigDigInputSnmpTrap.1
Start monitoring Hirschmann industrial Ethernet switch with digital I/O expansion module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HMIOMODULE-SNMP-MIB::hmIOModConfigDigInputSnmpTrap OID value, configure state conditions and alerts, and monitor any Hirschmann industrial Ethernet switch with digital I/O expansion module from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HIRSCHMANN-GENERIC-ERROR-MIB |
| 1.3.6.1.4.1.248.14 | hmConfiguration | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1 | hmChassis | HMPRIV-MGMT-SNMP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.14.1.13 | hmIOModuleGroup | HMIOMODULE-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1.13.1 | hmIOModuleConfigGroup | HMIOMODULE-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1.13.1.2 | hmIOModConfigDigInputTable | HMIOMODULE-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1.13.1.2.1 | hmIOModConfigDigInputEntry | HMIOMODULE-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1.13.1.2.1.4 | hmIOModConfigDigInputSnmpTrap | HMIOMODULE-SNMP-MIB |