All MIBs › HM2-L2REDUNDANCY-MIB › hm2RingCplNetCoupling
hm2RingCplNetCoupling
Module: HM2-L2REDUNDANCY-MIB
OID (symbolic): HM2-L2REDUNDANCY-MIB::hm2RingCplNetCoupling
OID (numeric): 1.3.6.1.4.1.248.11.40.1.8.1.1.16
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies the kind of the coupled net segment. If two HIPER Rings are coupled ringCoupling(1) must be used. In netCoupling(2) the coupled segment is no HIPER Ring topology and the switches in the coupled net segment may be connected with other ports than their ringports.
Notice: if the ring coupling mechanism switches over, in ringCoupling(1) only the address tables of the switches in the two coupled HIPER Rings will be erased, in netCoupling(2) the address tables of all switches in the coupled net will be erased.
What is hm2RingCplNetCoupling?
Chooses whether the coupled segment is another HIPER Ring (ringCoupling) or a general network segment (netCoupling); this also determines whether a coupling switchover clears address tables ring-wide or across the whole coupled net.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.11.40.1.8.1.1.16 snmpwalk -v2c -c public <target> HM2-L2REDUNDANCY-MIB::hm2RingCplNetCoupling
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.11.40.1.8.1.1.16.1 snmpget -v2c -c public <target> HM2-L2REDUNDANCY-MIB::hm2RingCplNetCoupling.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.11.40.1.8.1.1.16.1 i <value>
Start monitoring Hirschmann HiOS industrial Ethernet switch (MRP ring/RSTP redundancy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HM2-L2REDUNDANCY-MIB::hm2RingCplNetCoupling OID value, configure state conditions and alerts, and monitor any Hirschmann HiOS industrial Ethernet switch (MRP ring/RSTP redundancy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HM2-TC-MIB |
| 1.3.6.1.4.1.248.11 | hm2ConfigurationMibs | HM2-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.11.40 | hm2L2RedundancyMib | HM2-L2REDUNDANCY-MIB |
| 1.3.6.1.4.1.248.11.40.1 | hm2L2RedundancyMibObjects | HM2-L2REDUNDANCY-MIB |
| 1.3.6.1.4.1.248.11.40.1.8 | hm2RingCouplingMibGroup | HM2-L2REDUNDANCY-MIB |
| 1.3.6.1.4.1.248.11.40.1.8.1 | hm2RingCouplingTable | HM2-L2REDUNDANCY-MIB |
| 1.3.6.1.4.1.248.11.40.1.8.1.1 | hm2RingCouplingEntry | HM2-L2REDUNDANCY-MIB |
| 1.3.6.1.4.1.248.11.40.1.8.1.1.16 | hm2RingCplNetCoupling | HM2-L2REDUNDANCY-MIB |