All MIBs › HM2-L2REDUNDANCY-MIB › hm2RingCplControlModeOperState
hm2RingCplControlModeOperState
Module: HM2-L2REDUNDANCY-MIB
OID (symbolic): HM2-L2REDUNDANCY-MIB::hm2RingCplControlModeOperState
OID (numeric): 1.3.6.1.4.1.248.11.40.1.8.1.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Control mode of the ring coupling which can only be chosen by the slave, the master just reports his current control mode. unknown(3) cannot be set. In outband(1) mode an additional line must connect the control interfaces between the two partners in the ring coupling. In inband(2) mode only the coupling link port is needed. In local(4) mode the coupling link port and the partner port are located on the same switch.
What is hm2RingCplControlModeOperState?
Reports the actual control mode in use for the ring coupling - outband (needs a separate control line), inband (only the coupling link needed), or local (both ports on the same switch) - chosen by the slave and just reported by the master.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.11.40.1.8.1.1.10 snmpwalk -v2c -c public <target> HM2-L2REDUNDANCY-MIB::hm2RingCplControlModeOperState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.11.40.1.8.1.1.10.1 snmpget -v2c -c public <target> HM2-L2REDUNDANCY-MIB::hm2RingCplControlModeOperState.1
Start monitoring Hirschmann HiOS industrial Ethernet switch (MRP ring/RSTP redundancy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HM2-L2REDUNDANCY-MIB::hm2RingCplControlModeOperState OID value, configure state conditions and alerts, and monitor any Hirschmann HiOS industrial Ethernet switch (MRP ring/RSTP redundancy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HM2-TC-MIB |
| 1.3.6.1.4.1.248.11 | hm2ConfigurationMibs | HM2-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.11.40 | hm2L2RedundancyMib | HM2-L2REDUNDANCY-MIB |
| 1.3.6.1.4.1.248.11.40.1 | hm2L2RedundancyMibObjects | HM2-L2REDUNDANCY-MIB |
| 1.3.6.1.4.1.248.11.40.1.8 | hm2RingCouplingMibGroup | HM2-L2REDUNDANCY-MIB |
| 1.3.6.1.4.1.248.11.40.1.8.1 | hm2RingCouplingTable | HM2-L2REDUNDANCY-MIB |
| 1.3.6.1.4.1.248.11.40.1.8.1.1 | hm2RingCouplingEntry | HM2-L2REDUNDANCY-MIB |
| 1.3.6.1.4.1.248.11.40.1.8.1.1.10 | hm2RingCplControlModeOperState | HM2-L2REDUNDANCY-MIB |