All MIBs › HM2-IOMODULE-MIB › hm2IOModConfigDigOutputSnmpTrap
hm2IOModConfigDigOutputSnmpTrap
Module: HM2-IOMODULE-MIB
OID (symbolic): HM2-IOMODULE-MIB::hm2IOModConfigDigOutputSnmpTrap
OID (numeric): 1.3.6.1.4.1.248.11.100.1.1.3.1.4
Node type: OBJECT-TYPE
Type: HmEnabledStatus
Access: read-write
Description: Trigger an SNMP trap log when output status changes. If the value is disable (2), no SNMP trap will be sent. If the value is enable (1), a SNMP trap will be sent when the output state changes. The SNMP trap will be sent to all receivers configured in the snmpTargetAddrTable. The output state will be checked according to the refresh interval entered in hm2IOModConfigDigOutputRefreshInterval.
What is hm2IOModConfigDigOutputSnmpTrap?
This read-write HmEnabledStatus setting controls whether the device sends an SNMP trap when a digital output's state changes, or when the output value transitions to or from invalid(3). When enabled(1), the hm2IOModDigOutputChangeTrap notification is sent to all configured trap receivers. For example, an admin would enable this so the NMS is alerted immediately if an output goes invalid because its source input became unreachable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.11.100.1.1.3.1.4 snmpwalk -v2c -c public <target> HM2-IOMODULE-MIB::hm2IOModConfigDigOutputSnmpTrap
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.11.100.1.1.3.1.4.1 snmpget -v2c -c public <target> HM2-IOMODULE-MIB::hm2IOModConfigDigOutputSnmpTrap.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.11.100.1.1.3.1.4.1 s <value>
Start monitoring Hirschmann HiOS industrial Ethernet switch with digital I/O expansion module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HM2-IOMODULE-MIB::hm2IOModConfigDigOutputSnmpTrap OID value, configure state conditions and alerts, and monitor any Hirschmann HiOS industrial Ethernet switch with digital I/O expansion module from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HIRSCHMANN-GENERIC-ERROR-MIB |
| 1.3.6.1.4.1.248.11 | hm2ConfigurationMibs | HM2-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.11.100 | hm2IOModuleMib | HM2-IOMODULE-MIB |
| 1.3.6.1.4.1.248.11.100.1 | hm2IOModuleMibObjects | HM2-IOMODULE-MIB |
| 1.3.6.1.4.1.248.11.100.1.1 | hm2IOModConfigGroup | HM2-IOMODULE-MIB |
| 1.3.6.1.4.1.248.11.100.1.1.3 | hm2IOModConfigDigOutputTable | HM2-IOMODULE-MIB |
| 1.3.6.1.4.1.248.11.100.1.1.3.1 | hm2IOModConfigDigOutputEntry | HM2-IOMODULE-MIB |
| 1.3.6.1.4.1.248.11.100.1.1.3.1.4 | hm2IOModConfigDigOutputSnmpTrap | HM2-IOMODULE-MIB |