All MIBs › HM2-IOMODULE-MIB › hm2IOModConfigDigInputSnmpTrap
hm2IOModConfigDigInputSnmpTrap
Module: HM2-IOMODULE-MIB
OID (symbolic): HM2-IOMODULE-MIB::hm2IOModConfigDigInputSnmpTrap
OID (numeric): 1.3.6.1.4.1.248.11.100.1.1.2.1.4
Node type: OBJECT-TYPE
Type: HmEnabledStatus
Access: read-write
Description: Trigger an SNMP trap log when input status changes. If the value is disable (2), no SNMP trap will be sent. If the value is enable (1), a SNMP trap will be sent when the input state changes. The SNMP trap will be sent to all receivers configured in the snmpTargetAddrTable. The input state will be checked according to the refresh interval entered in hm2IOModConfigDigInputRefreshInterval.
What is hm2IOModConfigDigInputSnmpTrap?
This read-write HmEnabledStatus setting controls whether the device sends an SNMP trap to all receivers in snmpTargetAddrTable whenever a digital input's state changes. When enabled(1), the hm2IOModDigInputChangeTrap notification fires as soon as a state change is detected on the configured refresh interval. For example, an admin would enable this on an alarm-contact input so the NMS is notified in near real time when the contact opens.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.11.100.1.1.2.1.4 snmpwalk -v2c -c public <target> HM2-IOMODULE-MIB::hm2IOModConfigDigInputSnmpTrap
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.11.100.1.1.2.1.4.1 snmpget -v2c -c public <target> HM2-IOMODULE-MIB::hm2IOModConfigDigInputSnmpTrap.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.11.100.1.1.2.1.4.1 s <value>
Start monitoring Hirschmann HiOS industrial Ethernet switch with digital I/O expansion module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HM2-IOMODULE-MIB::hm2IOModConfigDigInputSnmpTrap OID value, configure state conditions and alerts, and monitor any Hirschmann HiOS industrial Ethernet switch with digital I/O expansion module from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HIRSCHMANN-GENERIC-ERROR-MIB |
| 1.3.6.1.4.1.248.11 | hm2ConfigurationMibs | HM2-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.11.100 | hm2IOModuleMib | HM2-IOMODULE-MIB |
| 1.3.6.1.4.1.248.11.100.1 | hm2IOModuleMibObjects | HM2-IOMODULE-MIB |
| 1.3.6.1.4.1.248.11.100.1.1 | hm2IOModConfigGroup | HM2-IOMODULE-MIB |
| 1.3.6.1.4.1.248.11.100.1.1.2 | hm2IOModConfigDigInputTable | HM2-IOMODULE-MIB |
| 1.3.6.1.4.1.248.11.100.1.1.2.1 | hm2IOModConfigDigInputEntry | HM2-IOMODULE-MIB |
| 1.3.6.1.4.1.248.11.100.1.1.2.1.4 | hm2IOModConfigDigInputSnmpTrap | HM2-IOMODULE-MIB |