All MIBs › HM2-IOMODULE-MIB › hm2IOModConfigDigInputLogEvent
hm2IOModConfigDigInputLogEvent
Module: HM2-IOMODULE-MIB
OID (symbolic): HM2-IOMODULE-MIB::hm2IOModConfigDigInputLogEvent
OID (numeric): 1.3.6.1.4.1.248.11.100.1.1.2.1.3
Node type: OBJECT-TYPE
Type: HmEnabledStatus
Access: read-write
Description: Trigger an event log when input status changes. If the value is disable (2), no event log entry will be written. If the value is enable (1), an event log entry will be written when the input state changes. The input state will be checked according to the refresh interval entered in hm2IOModConfigDigInputRefreshInterval.
What is hm2IOModConfigDigInputLogEvent?
This read-write HmEnabledStatus setting controls whether the device writes an event log entry whenever a digital input's state changes, based on the polling interval in hm2IOModConfigDigInputRefreshInterval. When enabled(1), every detected transition of the input is recorded in the event log for later review. For example, an admin monitoring a door sensor would enable this to build an audit trail of open/close events.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.11.100.1.1.2.1.3 snmpwalk -v2c -c public <target> HM2-IOMODULE-MIB::hm2IOModConfigDigInputLogEvent
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.11.100.1.1.2.1.3.1 snmpget -v2c -c public <target> HM2-IOMODULE-MIB::hm2IOModConfigDigInputLogEvent.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.11.100.1.1.2.1.3.1 s <value>
Start monitoring Hirschmann HiOS industrial Ethernet switch with digital I/O expansion module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HM2-IOMODULE-MIB::hm2IOModConfigDigInputLogEvent OID value, configure state conditions and alerts, and monitor any Hirschmann HiOS industrial Ethernet switch with digital I/O expansion module from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HIRSCHMANN-GENERIC-ERROR-MIB |
| 1.3.6.1.4.1.248.11 | hm2ConfigurationMibs | HM2-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.11.100 | hm2IOModuleMib | HM2-IOMODULE-MIB |
| 1.3.6.1.4.1.248.11.100.1 | hm2IOModuleMibObjects | HM2-IOMODULE-MIB |
| 1.3.6.1.4.1.248.11.100.1.1 | hm2IOModConfigGroup | HM2-IOMODULE-MIB |
| 1.3.6.1.4.1.248.11.100.1.1.2 | hm2IOModConfigDigInputTable | HM2-IOMODULE-MIB |
| 1.3.6.1.4.1.248.11.100.1.1.2.1 | hm2IOModConfigDigInputEntry | HM2-IOMODULE-MIB |
| 1.3.6.1.4.1.248.11.100.1.1.2.1.3 | hm2IOModConfigDigInputLogEvent | HM2-IOMODULE-MIB |