All MIBs › HHMSAGENT-MIB › hhmsSensorArrayUseDHCP
hhmsSensorArrayUseDHCP
Module: HHMSAGENT-MIB
OID (symbolic): HHMSAGENT-MIB::hhmsSensorArrayUseDHCP
OID (numeric): 1.3.6.1.4.1.3854.1.2.2.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: To use DHCP enter a 1, to use a static IP address enter a 2
What is hhmsSensorArrayUseDHCP?
Selects whether this sensor array gets its IP address via DHCP or a static address. Set it to static if you need a predictable address for a probe on a monitoring VLAN.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3854.1.2.2.1.2 snmpwalk -v2c -c public <target> HHMSAGENT-MIB::hhmsSensorArrayUseDHCP
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3854.1.2.2.1.2.1 snmpget -v2c -c public <target> HHMSAGENT-MIB::hhmsSensorArrayUseDHCP.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3854.1.2.2.1.2.1 i <value>
Start monitoring AKCP environmental monitoring unit (SNMP agent location) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HHMSAGENT-MIB::hhmsSensorArrayUseDHCP OID value, configure state conditions and alerts, and monitor any AKCP environmental monitoring unit (SNMP agent location) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3854 | akcp | HHMSAGENT-MIB |
| 1.3.6.1.4.1.3854.1 | hhmsagent | HHMSAGENT-MIB |
| 1.3.6.1.4.1.3854.1.2 | hhmsSensor | HHMSAGENT-MIB |
| 1.3.6.1.4.1.3854.1.2.2 | hhmsSensorArrayTable | HHMSAGENT-MIB |
| 1.3.6.1.4.1.3854.1.2.2.1 | hhmsSensorArrayEntry | HHMSAGENT-MIB |
| 1.3.6.1.4.1.3854.1.2.2.1.2 | hhmsSensorArrayUseDHCP | HHMSAGENT-MIB |