HH3C-RCR-MIB :: hh3cRcrCRRcrPlyLossRate

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HH3C-RCR-MIB › hh3cRcrCRRcrPlyLossRate

hh3cRcrCRRcrPlyLossRate

Module: HH3C-RCR-MIB

OID (symbolic): HH3C-RCR-MIB::hh3cRcrCRRcrPlyLossRate

OID (numeric): 1.3.6.1.4.1.25506.2.48.2.2.1.7

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: The packet loss percent of prefix which the CR concerns.

What is hh3cRcrCRRcrPlyLossRate?

Sets, as a percentage (1-100), the maximum packet loss rate this RCR policy tolerates for a matched prefix; exceeding it marks the prefix's current path as out of policy.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.48.2.2.1.7
snmpwalk -v2c -c public <target> HH3C-RCR-MIB::hh3cRcrCRRcrPlyLossRate

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.48.2.2.1.7.1
snmpget -v2c -c public <target> HH3C-RCR-MIB::hh3cRcrCRRcrPlyLossRate.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.2.48.2.2.1.7.1 i <value>

Start monitoring H3C edge/border routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-RCR-MIB::hh3cRcrCRRcrPlyLossRate OID value, configure state conditions and alerts, and monitor any H3C edge/border routers from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25506hh3cHH3C-OID-MIB
1.3.6.1.4.1.25506.2hh3cCommonHH3C-OID-MIB
1.3.6.1.4.1.25506.2.48hh3cRcrHH3C-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.25506.2.48.2hh3cRcrCRHH3C-RCR-MIB
1.3.6.1.4.1.25506.2.48.2.2hh3cRcrCRRcrPolicyTableHH3C-RCR-MIB
1.3.6.1.4.1.25506.2.48.2.2.1hh3cRcrCRRcrPolicyEntryHH3C-RCR-MIB
1.3.6.1.4.1.25506.2.48.2.2.1.7hh3cRcrCRRcrPlyLossRateHH3C-RCR-MIB

Module

This MIB depends on