HH3C-NQA-MIB :: hh3cNqaProbeFailure

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HH3C-NQA-MIB › hh3cNqaProbeFailure

hh3cNqaProbeFailure

Module: HH3C-NQA-MIB

OID (symbolic): HH3C-NQA-MIB::hh3cNqaProbeFailure

OID (numeric): 1.3.6.1.4.1.25506.8.3.3.3

Node type: NOTIFICATION-TYPE

Description: It is generated when the value of hh3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold.

The over threshold situations is specified as below. 1. When the probe test accumulatively failed for a number of times specified in hh3cNqaReactThresholdAccumNum in one test while the value of hh3cNqaReactThresholdType is 'accumulative'. 2. When the probe test consecutively failed for a number of times specified in hh3cNqaReactThresholdConsecNum in one test while the value of hh3cNqaReactThresholdType is 'consecutive'.

This notification is valid only when hh3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is not hh3cNqajitter.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' HH3C-NQA-MIB::hh3cNqaProbeFailure
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.25506.8.3.3.3

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:61794->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (466424162) 53 days, 23:37:21.62
  SNMPv2-MIB::snmpTrapOID.0 = OID: HH3C-NQA-MIB::hh3cNqaProbeFailure

Start monitoring H3C networking equipment (NQA synthetic-test probes) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-NQA-MIB::hh3cNqaProbeFailure OID value, configure state conditions and alerts, and monitor any H3C networking equipment (NQA synthetic-test probes) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25506hh3cHH3C-OID-MIB
1.3.6.1.4.1.25506.8hh3cRhwHH3C-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.25506.8.3hh3cNqaHH3C-NQA-MIB
1.3.6.1.4.1.25506.8.3.3hh3cNqaNotificationsHH3C-NQA-MIB
1.3.6.1.4.1.25506.8.3.3.3hh3cNqaProbeFailureHH3C-NQA-MIB