All MIBs › HH3C-NQA-MIB › hh3cNqaJitterSDOverThreshold
hh3cNqaJitterSDOverThreshold
Module: HH3C-NQA-MIB
OID (symbolic): HH3C-NQA-MIB::hh3cNqaJitterSDOverThreshold
OID (numeric): 1.3.6.1.4.1.25506.8.3.3.5
Node type: NOTIFICATION-TYPE
Description: The SD means the jitter values from source to destination.
It is generated when the value of hh3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold.
The over threshold situations is specified as below. 1. The average of SD in one jitter test is not in the range hh3cNqaReactThresholdLowerLimit through hh3cNqaReactThresholdUpperLimit and the hh3cNqaReactThresholdType is specified as 'average' type. 2. The average of SD in one jitter test is accumulatively not in the range hh3cNqaReactThresholdLowerLimit through hh3cNqaReactThresholdUpperLimit for a number of times specified in hh3cNqaReactThresholdAccumNum and the hh3cNqaReactThresholdType is specified as 'accumulative' type.
This notification is valid only when hh3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hh3cNqajitter.
Examples
Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):
snmptrap -v2c -c public <manager> '' HH3C-NQA-MIB::hh3cNqaJitterSDOverThreshold snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.25506.8.3.3.5
Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):
snmptrapd -f -Lo -c /dev/null authCommunity log public
Example snmptrapd log entry:
zoo11-linux.zoo [UDP: [192.168.30.111]:54359->[192.168.30.10]:162]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (128700503) 14 days, 21:30:05.03 SNMPv2-MIB::snmpTrapOID.0 = OID: HH3C-NQA-MIB::hh3cNqaJitterSDOverThreshold
Start monitoring H3C networking equipment (NQA synthetic-test probes) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-NQA-MIB::hh3cNqaJitterSDOverThreshold OID value, configure state conditions and alerts, and monitor any H3C networking equipment (NQA synthetic-test probes) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25506 | hh3c | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.8 | hh3cRhw | HH3C-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25506.8.3 | hh3cNqa | HH3C-NQA-MIB |
| 1.3.6.1.4.1.25506.8.3.3 | hh3cNqaNotifications | HH3C-NQA-MIB |
| 1.3.6.1.4.1.25506.8.3.3.5 | hh3cNqaJitterSDOverThreshold | HH3C-NQA-MIB |