All MIBs › HH3C-E1-MIB › hh3ce1LineCode
hh3ce1LineCode
Module: HH3C-E1-MIB
OID (symbolic): HH3C-E1-MIB::hh3ce1LineCode
OID (numeric): 1.3.6.1.4.1.25506.2.28.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies the line code type used on the E1 interface.
What is hh3ce1LineCode?
Selects the line coding scheme used on this E1 interface, ami(1) or hdb3(3), defaulting to hdb3. Mismatched line coding between the two ends of an E1 circuit typically causes constant framing/CRC errors, so admins verify this matches the carrier's requirement.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.28.2.1.4 snmpwalk -v2c -c public <target> HH3C-E1-MIB::hh3ce1LineCode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.28.2.1.4.1 snmpget -v2c -c public <target> HH3C-E1-MIB::hh3ce1LineCode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.2.28.2.1.4.1 i <value>
Start monitoring H3C router with E1 WAN interface card with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-E1-MIB::hh3ce1LineCode OID value, configure state conditions and alerts, and monitor any H3C router with E1 WAN interface card from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25506 | hh3c | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2 | hh3cCommon | HH3C-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25506.2.28 | hh3cE1 | HH3C-E1-MIB |
| 1.3.6.1.4.1.25506.2.28.2 | hh3ce1Table | HH3C-E1-MIB |
| 1.3.6.1.4.1.25506.2.28.2.1 | hh3ce1Entry | HH3C-E1-MIB |
| 1.3.6.1.4.1.25506.2.28.2.1.4 | hh3ce1LineCode | HH3C-E1-MIB |