All MIBs › HH3C-E1-MIB › hh3ce1FrameFormat
hh3ce1FrameFormat
Module: HH3C-E1-MIB
OID (symbolic): HH3C-E1-MIB::hh3ce1FrameFormat
OID (numeric): 1.3.6.1.4.1.25506.2.28.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies the frame format used on the E1 interface.
What is hh3ce1FrameFormat?
Selects the E1 frame format, crc4(1) or nocrc4(2), defaulting to crc4. Both ends of the E1 link must use the same frame format or the circuit will fail to synchronize.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.28.2.1.3 snmpwalk -v2c -c public <target> HH3C-E1-MIB::hh3ce1FrameFormat
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.28.2.1.3.1 snmpget -v2c -c public <target> HH3C-E1-MIB::hh3ce1FrameFormat.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.2.28.2.1.3.1 i <value>
Start monitoring H3C router with E1 WAN interface card with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-E1-MIB::hh3ce1FrameFormat OID value, configure state conditions and alerts, and monitor any H3C router with E1 WAN interface card from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25506 | hh3c | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2 | hh3cCommon | HH3C-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25506.2.28 | hh3cE1 | HH3C-E1-MIB |
| 1.3.6.1.4.1.25506.2.28.2 | hh3ce1Table | HH3C-E1-MIB |
| 1.3.6.1.4.1.25506.2.28.2.1 | hh3ce1Entry | HH3C-E1-MIB |
| 1.3.6.1.4.1.25506.2.28.2.1.3 | hh3ce1FrameFormat | HH3C-E1-MIB |