HDSL2-SHDSL-LINE-MIB :: hdsl2ShdsldeviceFault

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHDSL2-SHDSL-LINE-MIBhdsl2ShdsldeviceFault

hdsl2ShdsldeviceFault

Module: HDSL2-SHDSL-LINE-MIB

OID (symbolic): HDSL2-SHDSL-LINE-MIB::hdsl2ShdsldeviceFault

OID (numeric): 1.3.6.1.2.1.10.48.0.11

Node type: NOTIFICATION-TYPE

Description: This notification indicates that the bit setting for deviceFault in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed.

What is hdsl2ShdsldeviceFault?

This notification is sent when the device fault condition flag in the HDSL2/SHDSL endpoint status changes, indicating a hardware or line-level fault has occurred or been cleared. The trap alerts operators to physical equipment problems such as signal loss, power supply failure, or hardware damage on high-speed DSL lines. Receiving this trap triggers immediate investigation of the affected endpoint to determine if manual intervention is needed.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' HDSL2-SHDSL-LINE-MIB::hdsl2ShdsldeviceFault
snmptrap -v2c -c public <manager> '' 1.3.6.1.2.1.10.48.0.11

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:54149->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (518283653) 59 days, 23:40:36.53
  SNMPv2-MIB::snmpTrapOID.0 = OID: HDSL2-SHDSL-LINE-MIB::hdsl2ShdsldeviceFault

Start monitoring Vendor-neutral DSL modem/DSLAM/router, any manufacturer (HDSL2/G.SHDSL, RFC 4319) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HDSL2-SHDSL-LINE-MIB::hdsl2ShdsldeviceFault OID value, configure state conditions and alerts, and monitor any Vendor-neutral DSL modem/DSLAM/router, any manufacturer (HDSL2/G.SHDSL, RFC 4319) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.48hdsl2ShdslMIBHDSL2-SHDSL-LINE-MIB
1.3.6.1.2.1.10.48.0hdsl2ShdslNotificationsHDSL2-SHDSL-LINE-MIB
1.3.6.1.2.1.10.48.0.11hdsl2ShdsldeviceFaultHDSL2-SHDSL-LINE-MIB