HDSL2-SHDSL-LINE-MIB :: hdsl2ShdslStatusMaxAttainableLineRate

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHDSL2-SHDSL-LINE-MIBhdsl2ShdslStatusMaxAttainableLineRate

hdsl2ShdslStatusMaxAttainableLineRate

Module: HDSL2-SHDSL-LINE-MIB

OID (symbolic): HDSL2-SHDSL-LINE-MIB::hdsl2ShdslStatusMaxAttainableLineRate

OID (numeric): 1.3.6.1.2.1.10.48.1.2.1.2

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: Contains the maximum attainable line rate in this HDSL2/SHDSL span. This object provides the maximum rate the line is capable of achieving. This is based upon measurements made during line probing. This rate includes payload (user data) and any applicable framing overhead.

What is hdsl2ShdslStatusMaxAttainableLineRate?

Reports the maximum line rate in bps (including payload and framing overhead) this span could achieve, as measured during line probing. Comparing it to the actual line rate shows whether the line is running below its physical capability.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.48.1.2.1.2
snmpwalk -v2c -c public <target> HDSL2-SHDSL-LINE-MIB::hdsl2ShdslStatusMaxAttainableLineRate

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.48.1.2.1.2.1
snmpget -v2c -c public <target> HDSL2-SHDSL-LINE-MIB::hdsl2ShdslStatusMaxAttainableLineRate.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hdsl2ShdslStatusMaxAttainableLineRate.1

Start monitoring Vendor-neutral DSL modem/DSLAM/router, any manufacturer (HDSL2/G.SHDSL, RFC 4319) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HDSL2-SHDSL-LINE-MIB::hdsl2ShdslStatusMaxAttainableLineRate OID value, configure state conditions and alerts, and monitor any Vendor-neutral DSL modem/DSLAM/router, any manufacturer (HDSL2/G.SHDSL, RFC 4319) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.48hdsl2ShdslMIBHDSL2-SHDSL-LINE-MIB
1.3.6.1.2.1.10.48.1hdsl2ShdslMibObjectsHDSL2-SHDSL-LINE-MIB
1.3.6.1.2.1.10.48.1.2hdsl2ShdslSpanStatusTableHDSL2-SHDSL-LINE-MIB
1.3.6.1.2.1.10.48.1.2.1hdsl2ShdslSpanStatusEntryHDSL2-SHDSL-LINE-MIB
1.3.6.1.2.1.10.48.1.2.1.2hdsl2ShdslStatusMaxAttainableLineRateHDSL2-SHDSL-LINE-MIB