All MIBs › HDSL2-SHDSL-LINE-MIB › hdsl2ShdslSpanConfWorstCaseTargetMarginDown
hdsl2ShdslSpanConfWorstCaseTargetMarginDown
Module: HDSL2-SHDSL-LINE-MIB
OID (symbolic): HDSL2-SHDSL-LINE-MIB::hdsl2ShdslSpanConfWorstCaseTargetMarginDown
OID (numeric): 1.3.6.1.2.1.10.48.1.10.1.10
Node type: OBJECT-TYPE
Type: Integer32
Access: read-create
Description:
This object specifies the downstream worst-case target SNR margin for an SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a unit.
What is hdsl2ShdslSpanConfWorstCaseTargetMarginDown?
This parameter sets the downstream Signal-to-Noise Ratio (SNR) margin that the SHDSL line should maintain even under worst-case conditions, measured in dB. A higher margin provides greater tolerance for noise and signal degradation before the line becomes unstable. A DSL technician would adjust this value to balance line stability (higher margin) against achievable data rates (lower margin allows faster speeds on cleaner lines).
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.48 | hdsl2ShdslMIB | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1 | hdsl2ShdslMibObjects | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1.10 | hdsl2ShdslSpanConfProfileTable | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1.10.1 | hdsl2ShdslSpanConfProfileEntry | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1.10.1.10 | hdsl2ShdslSpanConfWorstCaseTargetMarginDown | HDSL2-SHDSL-LINE-MIB |