All MIBs › HDSL2-SHDSL-LINE-MIB › hdsl2ShdslSpanConfUsedTargetMargins
hdsl2ShdslSpanConfUsedTargetMargins
Module: HDSL2-SHDSL-LINE-MIB
OID (symbolic): HDSL2-SHDSL-LINE-MIB::hdsl2ShdslSpanConfUsedTargetMargins
OID (numeric): 1.3.6.1.2.1.10.48.1.10.1.13
Node type: OBJECT-TYPE
Type: Bits
Access: read-create
Description:
Indicates whether a target SNR margin is enabled or disabled. This is a bit-map of possible settings. The various bit positions are as follows:
currCondDown - current-condition downstream target SNR margin enabled
worstCaseDown - worst-case downstream target SNR margin enabled
currCondUp - current-condition upstream target SNR margin enabled
worstCaseUp - worst-case upstream target SNR margin enabled.
What is hdsl2ShdslSpanConfUsedTargetMargins?
This OID holds a bitmap (set of on/off switches) that shows which SNR margin settings are currently enabled for upstream and downstream HDSL/SHDSL line transmission. It indicates whether the line is set to optimize for current conditions or worst-case scenarios on each direction. An operator would check this to confirm that line quality safeguards are properly configured before activating a new HDSL link.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.48 | hdsl2ShdslMIB | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1 | hdsl2ShdslMibObjects | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1.10 | hdsl2ShdslSpanConfProfileTable | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1.10.1 | hdsl2ShdslSpanConfProfileEntry | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1.10.1.13 | hdsl2ShdslSpanConfUsedTargetMargins | HDSL2-SHDSL-LINE-MIB |