All MIBs › HDSL2-SHDSL-LINE-MIB › hdsl2ShdslSpanConfCurrCondTargetMarginUp
hdsl2ShdslSpanConfCurrCondTargetMarginUp
Module: HDSL2-SHDSL-LINE-MIB
OID (symbolic): HDSL2-SHDSL-LINE-MIB::hdsl2ShdslSpanConfCurrCondTargetMarginUp
OID (numeric): 1.3.6.1.2.1.10.48.1.10.1.11
Node type: OBJECT-TYPE
Type: Integer32
Access: read-create
Description:
This object specifies the upstream current-condition target SNR margin for an SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a unit.
What is hdsl2ShdslSpanConfCurrCondTargetMarginUp?
This object specifies the desired upstream Signal-to-Noise Ratio (SNR) margin for an SHDSL line during current operation, measured as the difference between the target SNR and the actual SNR. A higher margin value means the line is more robust against noise but may consume more power. Operators configure this based on line quality and power consumption requirements.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.48 | hdsl2ShdslMIB | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1 | hdsl2ShdslMibObjects | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1.10 | hdsl2ShdslSpanConfProfileTable | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1.10.1 | hdsl2ShdslSpanConfProfileEntry | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1.10.1.11 | hdsl2ShdslSpanConfCurrCondTargetMarginUp | HDSL2-SHDSL-LINE-MIB |