All MIBs › HDSL2-SHDSL-LINE-MIB › hdsl2ShdslMaintPowerBackOff
hdsl2ShdslMaintPowerBackOff
Module: HDSL2-SHDSL-LINE-MIB
OID (symbolic): HDSL2-SHDSL-LINE-MIB::hdsl2ShdslMaintPowerBackOff
OID (numeric): 1.3.6.1.2.1.10.48.1.8.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object configures the receiver at the associated segment endpoint to operate in default or enhanced power backoff mode.
What is hdsl2ShdslMaintPowerBackOff?
Configures the receiver at this segment endpoint to use default(1) or enhanced(2) power backoff, a setting used to reduce crosstalk into other pairs sharing the cable bundle.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.48.1.8.1.3 snmpwalk -v2c -c public <target> HDSL2-SHDSL-LINE-MIB::hdsl2ShdslMaintPowerBackOff
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.48.1.8.1.3.1 snmpget -v2c -c public <target> HDSL2-SHDSL-LINE-MIB::hdsl2ShdslMaintPowerBackOff.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.48.1.8.1.3.1 i <value>
Start monitoring Vendor-neutral DSL modem/DSLAM/router, any manufacturer (HDSL2/G.SHDSL, RFC 4319) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HDSL2-SHDSL-LINE-MIB::hdsl2ShdslMaintPowerBackOff OID value, configure state conditions and alerts, and monitor any Vendor-neutral DSL modem/DSLAM/router, any manufacturer (HDSL2/G.SHDSL, RFC 4319) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.48 | hdsl2ShdslMIB | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1 | hdsl2ShdslMibObjects | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1.8 | hdsl2ShdslEndpointMaintTable | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1.8.1 | hdsl2ShdslEndpointMaintEntry | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1.8.1.3 | hdsl2ShdslMaintPowerBackOff | HDSL2-SHDSL-LINE-MIB |