All MIBs › HDSL2-SHDSL-LINE-MIB › hdsl2ShdslMaintLoopbackConfig
hdsl2ShdslMaintLoopbackConfig
Module: HDSL2-SHDSL-LINE-MIB
OID (symbolic): HDSL2-SHDSL-LINE-MIB::hdsl2ShdslMaintLoopbackConfig
OID (numeric): 1.3.6.1.2.1.10.48.1.8.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object controls configuration of loopbacks for the associated segment endpoint. The status of the loopback is obtained via the hdsl2ShdslEndpointCurrStatus object.
What is hdsl2ShdslMaintLoopbackConfig?
Controls loopback testing at this segment endpoint: noLoopback(1), normalLoopback(2), or specialLoopback(3). An admin sets this to normalLoopback to run an isolation test on a suspect line, then checks the resulting bit in hdsl2ShdslEndpointCurrStatus.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.48.1.8.1.1 snmpwalk -v2c -c public <target> HDSL2-SHDSL-LINE-MIB::hdsl2ShdslMaintLoopbackConfig
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.48.1.8.1.1.1 snmpget -v2c -c public <target> HDSL2-SHDSL-LINE-MIB::hdsl2ShdslMaintLoopbackConfig.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.48.1.8.1.1.1 i <value>
Start monitoring Vendor-neutral DSL modem/DSLAM/router, any manufacturer (HDSL2/G.SHDSL, RFC 4319) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HDSL2-SHDSL-LINE-MIB::hdsl2ShdslMaintLoopbackConfig OID value, configure state conditions and alerts, and monitor any Vendor-neutral DSL modem/DSLAM/router, any manufacturer (HDSL2/G.SHDSL, RFC 4319) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.48 | hdsl2ShdslMIB | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1 | hdsl2ShdslMibObjects | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1.8 | hdsl2ShdslEndpointMaintTable | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1.8.1 | hdsl2ShdslEndpointMaintEntry | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1.8.1.1 | hdsl2ShdslMaintLoopbackConfig | HDSL2-SHDSL-LINE-MIB |