All MIBs › HDSL2-SHDSL-LINE-MIB › hdsl2ShdslEndpointThreshLoopAttenuation
hdsl2ShdslEndpointThreshLoopAttenuation
Module: HDSL2-SHDSL-LINE-MIB
OID (symbolic): HDSL2-SHDSL-LINE-MIB::hdsl2ShdslEndpointThreshLoopAttenuation
OID (numeric): 1.3.6.1.2.1.10.48.1.11.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-create
Description:
This object configures the loop attenuation alarm threshold. When the current value of hdsl2ShdslEndpointCurrAtn reaches or exceeds this threshold, an hdsl2ShdslLoopAttenCrossing MAY be generated.
What is hdsl2ShdslEndpointThreshLoopAttenuation?
This object sets an alarm threshold for signal attenuation on HDSL/SHDSL digital subscriber lines—when signal loss exceeds this value, an alert fires. It helps operators catch degrading line quality before complete service outage, indicating the line path is becoming too noisy or long. A technician testing a suspect DSL circuit would lower this threshold to get early warning of signal degradation.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.48 | hdsl2ShdslMIB | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1 | hdsl2ShdslMibObjects | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1.11 | hdsl2ShdslEndpointAlarmConfProfileTable | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1.11.1 | hdsl2ShdslEndpointAlarmConfProfileEntry | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1.11.1.2 | hdsl2ShdslEndpointThreshLoopAttenuation | HDSL2-SHDSL-LINE-MIB |