All MIBs › HDSL2-SHDSL-LINE-MIB › hdsl2ShdslEndpointCurrActivationState
hdsl2ShdslEndpointCurrActivationState
Module: HDSL2-SHDSL-LINE-MIB
OID (symbolic): HDSL2-SHDSL-LINE-MIB::hdsl2ShdslEndpointCurrActivationState
OID (numeric): 1.3.6.1.2.1.10.48.1.5.1.22
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object indicates the activation or training state of the wire pair.
What is hdsl2ShdslEndpointCurrActivationState?
Reports where this wire pair is in its startup sequence: preActivation (pre-train), activation (training), or data (trained and passing traffic). A pair stuck short of data indicates a training failure.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.48.1.5.1.22 snmpwalk -v2c -c public <target> HDSL2-SHDSL-LINE-MIB::hdsl2ShdslEndpointCurrActivationState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.48.1.5.1.22.1 snmpget -v2c -c public <target> HDSL2-SHDSL-LINE-MIB::hdsl2ShdslEndpointCurrActivationState.1
Start monitoring Vendor-neutral DSL modem/DSLAM/router, any manufacturer (HDSL2/G.SHDSL, RFC 4319) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HDSL2-SHDSL-LINE-MIB::hdsl2ShdslEndpointCurrActivationState OID value, configure state conditions and alerts, and monitor any Vendor-neutral DSL modem/DSLAM/router, any manufacturer (HDSL2/G.SHDSL, RFC 4319) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.48 | hdsl2ShdslMIB | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1 | hdsl2ShdslMibObjects | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1.5 | hdsl2ShdslEndpointCurrTable | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1.5.1 | hdsl2ShdslEndpointCurrEntry | HDSL2-SHDSL-LINE-MIB |
| 1.3.6.1.2.1.10.48.1.5.1.22 | hdsl2ShdslEndpointCurrActivationState | HDSL2-SHDSL-LINE-MIB |