H3C-TE-TUNNEL-MIB :: h3cTeTunnelPsHoldOffTime

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › H3C-TE-TUNNEL-MIB › h3cTeTunnelPsHoldOffTime

h3cTeTunnelPsHoldOffTime

Module: H3C-TE-TUNNEL-MIB

OID (symbolic): H3C-TE-TUNNEL-MIB::h3cTeTunnelPsHoldOffTime

OID (numeric): 1.3.6.1.4.1.43.45.1.10.2.115.2.3.1.10

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: This value is switchback delay time. When detected the work path fault, switch to protect path after this time.

What is h3cTeTunnelPsHoldOffTime?

This read-only value, in units of 500ms and defaulting to 0, sets the delay after a working-path fault is detected before the group actually switches to the protection tunnel. An admin uses a nonzero hold-off time to avoid switching over on transient, self-clearing faults, trading a small failover delay for stability. For example, setting h3cTeTunnelPsHoldOffTime to 4 waits 2 seconds after a fault is detected before committing to switch traffic onto the protection tunnel.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.115.2.3.1.10
snmpwalk -v2c -c public <target> H3C-TE-TUNNEL-MIB::h3cTeTunnelPsHoldOffTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.115.2.3.1.10.1
snmpget -v2c -c public <target> H3C-TE-TUNNEL-MIB::h3cTeTunnelPsHoldOffTime.1

Start monitoring H3C MPLS-capable router (Traffic Engineering CR-LSP tunnels) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the H3C-TE-TUNNEL-MIB::h3cTeTunnelPsHoldOffTime OID value, configure state conditions and alerts, and monitor any H3C MPLS-capable router (Traffic Engineering CR-LSP tunnels) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-AUDL-R1-MIB
1.3.6.1.4.1.43.45jv_mibA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1huaweiA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10h3cA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10.2h3cCommonA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10.2.115h3cTeTunnelA3COM-HUAWEI-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.45.1.10.2.115.2h3cTeTunnelObjectsH3C-TE-TUNNEL-MIB
1.3.6.1.4.1.43.45.1.10.2.115.2.3h3cTeTunnelPsTableH3C-TE-TUNNEL-MIB
1.3.6.1.4.1.43.45.1.10.2.115.2.3.1h3cTeTunnelPsEntryH3C-TE-TUNNEL-MIB
1.3.6.1.4.1.43.45.1.10.2.115.2.3.1.10h3cTeTunnelPsHoldOffTimeH3C-TE-TUNNEL-MIB