All MIBs › GSWITCH-MIB › nbsParitionEnable
nbsParitionEnable
Module: GSWITCH-MIB
OID (symbolic): GSWITCH-MIB::nbsParitionEnable
OID (numeric): 1.3.6.1.4.1.629.2.3.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Partition Mode Enable. When more then 32 collisions occur while transmitting, the Switch-G port enters to the Partition mode. It waits for the first good packet from the wire and then return to Normal mode of opration. In Partition mode transmitting fromthe port is enabled but receiving is disabled. 1 - Patrition mode, 2 - Normal mode
What is nbsParitionEnable?
This read-write OID globally enables (value 1) or disables (value 2) automatic port partitioning, the mechanism that isolates a port's receive path after more than 32 transmit collisions until a good packet is seen. An admin disables this to keep a chronically noisy port passing traffic instead of self-isolating.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.629.2.3.8 snmpwalk -v2c -c public <target> GSWITCH-MIB::nbsParitionEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.629.2.3.8.1 snmpget -v2c -c public <target> GSWITCH-MIB::nbsParitionEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.629.2.3.8.1 i <value>
Start monitoring Nbase Communications (later Nbase-Xyplex) managed Ethernet switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GSWITCH-MIB::nbsParitionEnable OID value, configure state conditions and alerts, and monitor any Nbase Communications (later Nbase-Xyplex) managed Ethernet switch from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.629 | nbase | GSWITCH-MIB |
| 1.3.6.1.4.1.629.2 | gswitch | GSWITCH-MIB |
| 1.3.6.1.4.1.629.2.3 | nbsDeviceControl | GSWITCH-MIB |
| 1.3.6.1.4.1.629.2.3.8 | nbsParitionEnable | GSWITCH-MIB |