All MIBs › GE-SINGLEUPS › geRFCTrapsToSend
geRFCTrapsToSend
Module: GE-SINGLEUPS
OID (symbolic): GE-SINGLEUPS::geRFCTrapsToSend
OID (numeric): 1.3.6.1.4.1.818.3.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object defines whether RFC traps need to be send. The bit value 1 indicates that the traps needs to be send, while value 0 does not result in a trap to send.
What is geRFCTrapsToSend?
Writable switch that decides whether standard RFC (UPS-MIB) traps are sent: on(1) sends them, off(0) does not. Turn it on if your trap receiver expects the standard traps.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.818.3.1.9 snmpwalk -v2c -c public <target> GE-SINGLEUPS::geRFCTrapsToSend
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.818.3.1.9.1 snmpget -v2c -c public <target> GE-SINGLEUPS::geRFCTrapsToSend.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.818.3.1.9.1 i <value>
Start monitoring GE Digital Energy single-unit UPS system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GE-SINGLEUPS::geRFCTrapsToSend OID value, configure state conditions and alerts, and monitor any GE Digital Energy single-unit UPS system from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.818 | imv | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.3 | geAgent | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.3.1 | geAgentConfig | GE-PARALLELUPS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.818.3.1.9 | geRFCTrapsToSend | GE-SINGLEUPS |