All MIBs › GDCUAS7626-MIB › uas7626SwitchActiveFirmware
uas7626SwitchActiveFirmware
Module: GDCUAS7626-MIB
OID (symbolic): GDCUAS7626-MIB::uas7626SwitchActiveFirmware
OID (numeric): 1.3.6.1.4.1.498.12.12.1.2.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to switch the active executing firmware from the version in uas7626ActiveFirmwareRev to the version in uas7626StoredFirmwareRev.
When a switchActive(2) is set (write only) the element will: 1) reboot 2) uncompress stored code into active area 3) perform checksum on active area 4) Set uas7626StoredStatus object to indicate results 5) If succesfull: update uas7626ActiveFirmwareRev and uas7626StoredFirmwareRev and begin executing If failed: replace active area with previous revision
The switchNorm(1) enumeration will always be read.
Setting switchActive(2) when the uas7626StoredFirmwareStatus is not statOK(3) will result in an error. Valid [i]nterface = 0
What is uas7626SwitchActiveFirmware?
Setting this to switchActive(2) tells the UAS7626 to reboot, uncompress the stored firmware into the active area, checksum it, and switch to running it (falling back to the previous version on failure); this only succeeds if uas7626StoredFirmwareStatus is statOK(3), otherwise the set is rejected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.12.12.1.2.1.5 snmpwalk -v2c -c public <target> GDCUAS7626-MIB::uas7626SwitchActiveFirmware
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.12.12.1.2.1.5.1 snmpget -v2c -c public <target> GDCUAS7626-MIB::uas7626SwitchActiveFirmware.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.498.12.12.1.2.1.5.1 i <value>
Start monitoring General DataComm (GDC) UAS7626 26-port access multiplexer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GDCUAS7626-MIB::uas7626SwitchActiveFirmware OID value, configure state conditions and alerts, and monitor any General DataComm (GDC) UAS7626 26-port access multiplexer from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | DMA200-MIB |
| 1.3.6.1.4.1.498.12 | bql2 | GDC7616-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.12.12 | uas7626 | GDCUAS7626-MIB |
| 1.3.6.1.4.1.498.12.12.1 | uas7626Version | GDCUAS7626-MIB |
| 1.3.6.1.4.1.498.12.12.1.2 | uas7626VersionTable | GDCUAS7626-MIB |
| 1.3.6.1.4.1.498.12.12.1.2.1 | uas7626VersionEntry | GDCUAS7626-MIB |
| 1.3.6.1.4.1.498.12.12.1.2.1.5 | uas7626SwitchActiveFirmware | GDCUAS7626-MIB |