All MIBs › GDCMDM-MIB › mdmDCDCntrl
mdmDCDCntrl
Module: GDCMDM-MIB
OID (symbolic): GDCMDM-MIB::mdmDCDCntrl
OID (numeric): 1.3.6.1.4.1.498.4.2.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Option the EIA DCD mode of operation. ForceOn DCD always ON. Real DCD will follow CCITT specifications. ForceOnToggleDisc DCD is On but toggle on disconnect as a signaling to the front end.
What is mdmDCDCntrl?
Controls how the EIA Data Carrier Detect (DCD) lead behaves: forced always on, following real carrier status per CCITT spec, or forced on but toggling briefly on disconnect to signal the front-end equipment.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.4.2.1.9 snmpwalk -v2c -c public <target> GDCMDM-MIB::mdmDCDCntrl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.4.2.1.9.1 snmpget -v2c -c public <target> GDCMDM-MIB::mdmDCDCntrl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.498.4.2.1.9.1 i <value>
Start monitoring General DataComm (GDC) dial-up/leased-line modem with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GDCMDM-MIB::mdmDCDCntrl OID value, configure state conditions and alerts, and monitor any General DataComm (GDC) dial-up/leased-line modem from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | DMA200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.4 | mdm | GDCMDM-MIB |
| 1.3.6.1.4.1.498.4.2 | mdmDTEConfigTable | GDCMDM-MIB |
| 1.3.6.1.4.1.498.4.2.1 | mdmDTEntry | GDCMDM-MIB |
| 1.3.6.1.4.1.498.4.2.1.9 | mdmDCDCntrl | GDCMDM-MIB |