All MIBs › GDCMDM-MIB › mdmCPMMonitor
mdmCPMMonitor
Module: GDCMDM-MIB
OID (symbolic): GDCMDM-MIB::mdmCPMMonitor
OID (numeric): 1.3.6.1.4.1.498.4.4.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Command used to option the Call Progress Monitor operation. This object is Country Code dependent. basic The modem will blind dial and will only send a CONNECT message for all established links. All CPM is disabled. extendedNoCPM This command is the same as basic with the exception of the connect messages. The modem will send the appropiate connect response of CONNECT followed by the connected speed. extendedDialTone This command is the same as extendedNoCPM command but without blind dialing. The modem will send the NO DIALTONE message if dial tone is not detected. extendedBusy This command forces the modem to blind dial. The modem will not respond with the NO DIALTONE message while all other CPM responses are enabled. extendedFullCPM This command enables all CPM response codes and monitoring, except rinback detection. extendedFullCPMRingback This command enables all CPM response codes and monitoring, and includes ringback detection. This object is Country Code dependent.
What is mdmCPMMonitor?
Sets how much Call Progress Monitor detail the modem reports while dialing, ranging from basic blind-dial-and-CONNECT-only up to full monitoring including ringback detection; this is country-code dependent.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.4.4.1.2 snmpwalk -v2c -c public <target> GDCMDM-MIB::mdmCPMMonitor
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.4.4.1.2.1 snmpget -v2c -c public <target> GDCMDM-MIB::mdmCPMMonitor.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.498.4.4.1.2.1 i <value>
Start monitoring General DataComm (GDC) dial-up/leased-line modem with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GDCMDM-MIB::mdmCPMMonitor OID value, configure state conditions and alerts, and monitor any General DataComm (GDC) dial-up/leased-line modem from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | DMA200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.4 | mdm | GDCMDM-MIB |
| 1.3.6.1.4.1.498.4.4 | mdmDialerConfigTable | GDCMDM-MIB |
| 1.3.6.1.4.1.498.4.4.1 | mdmDialerEntry | GDCMDM-MIB |
| 1.3.6.1.4.1.498.4.4.1.2 | mdmCPMMonitor | GDCMDM-MIB |