GBNL2PortSecurity-MIB :: portsecurityMacRuleRowStatus

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › GBNL2PortSecurity-MIB › portsecurityMacRuleRowStatus

portsecurityMacRuleRowStatus

Module: GBNL2PortSecurity-MIB

OID (symbolic): GBNL2PortSecurity-MIB::portsecurityMacRuleRowStatus

OID (numeric): 1.3.6.1.4.1.13464.1.2.4.1.8.2.1.7

Node type: OBJECT-TYPE

Type: RowStatus

Access: read-write

Description: use to create or delete a rule.step:1)portsecurityMacRuleRowStatus with value 5(create and wait);2)other mib needed; for mac rule just portSecurityMacRuleType and portSecurityMacRuleAction, for mac+vid rule just portSecurityMacRuleType, portSecurityMacRuleAction, and portSecurityMacRuleVid, for mac+ip rule just portSecurityMacRuleType, portSecurityMacRuleAction, and portSecurityMacRuleIpv4; 3)portsecurityMacRuleRowStatus with value 4(create and go) to create, or portsecurityMacRuleRowStatus with value 6(destroy) to delete

What is portsecurityMacRuleRowStatus?

The RowStatus used to create or delete a MAC security rule; per the MIB's documented workflow, an admin sets it to createAndWait (5), fills in the type/action (and VID or IPv4 as needed), then sets it to createAndGo (4) to activate the rule or destroy (6) to remove it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.13464.1.2.4.1.8.2.1.7
snmpwalk -v2c -c public <target> GBNL2PortSecurity-MIB::portsecurityMacRuleRowStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.13464.1.2.4.1.8.2.1.7.1
snmpget -v2c -c public <target> GBNL2PortSecurity-MIB::portsecurityMacRuleRowStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.13464.1.2.4.1.8.2.1.7.1 s <value>

Start monitoring Greentech (GBN) managed switch (Layer 2 port security) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GBNL2PortSecurity-MIB::portsecurityMacRuleRowStatus OID value, configure state conditions and alerts, and monitor any Greentech (GBN) managed switch (Layer 2 port security) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.13464adminADMIN-MASTER-MIB
1.3.6.1.4.1.13464.1dataComADMIN-MASTER-MIB
1.3.6.1.4.1.13464.1.2gbnADMIN-MASTER-MIB
1.3.6.1.4.1.13464.1.2.4gbnL2ADMIN-MASTER-MIB
Numeric OIDNameModule
1.3.6.1.4.1.13464.1.2.4.1gbnL2SwitchGBNL2PortSecurity-MIB
1.3.6.1.4.1.13464.1.2.4.1.8gbnL2PortSecurityMibGBNL2PortSecurity-MIB
1.3.6.1.4.1.13464.1.2.4.1.8.2portSecurityMacRuleTableGBNL2PortSecurity-MIB
1.3.6.1.4.1.13464.1.2.4.1.8.2.1portSecurityMacRuleEntryGBNL2PortSecurity-MIB
1.3.6.1.4.1.13464.1.2.4.1.8.2.1.7portsecurityMacRuleRowStatusGBNL2PortSecurity-MIB