All MIBs › GANDALF-ENTERPRISE-MIB › bridgeDot1dTpFdbStatus
bridgeDot1dTpFdbStatus
Module: GANDALF-ENTERPRISE-MIB
OID (symbolic): GANDALF-ENTERPRISE-MIB::bridgeDot1dTpFdbStatus
OID (numeric): 1.3.6.1.4.1.64.2.2.10.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The status of this entry. The meanings of the values are:
other(1) : none of the following. This would include the case where some other MIB object (not the corresponding instance of dot1dTpFdbPort, nor an entry in the dot1dStaticTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1dTpFdbAddress are being forwarded.
invalid(2) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has not yet been flushed from the table.
learned(3) : the value of the corresponding instance of dot1dTpFdbPort was learned, and is being used.
self(4) : the value of the corresponding instance of dot1dTpFdbAddress represents one of the bridge's addresses. The corresponding instance of dot1dTpFdbPort indicates which of the bridge's ports has this address.
mgmt(5) : the value of the corresponding instance of dot1dTpFdbAddress is also the value of an existing instance of dot1dStaticAddress.
What is bridgeDot1dTpFdbStatus?
Reports how the corresponding forwarding-database entry was established: other(1) for entries governed by something outside this table, invalid(2) for an aged-out entry not yet purged, learned(3) for a dynamically learned address, self(4) for one of the bridge's own port addresses, or mgmt(5) for an address that's also configured as a static entry. Admins use this to distinguish genuinely learned device addresses from the bridge's own addresses or admin-configured static entries when auditing the forwarding table.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.64.2.2.10.1.3 snmpwalk -v2c -c public <target> GANDALF-ENTERPRISE-MIB::bridgeDot1dTpFdbStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.64.2.2.10.1.3.1 snmpget -v2c -c public <target> GANDALF-ENTERPRISE-MIB::bridgeDot1dTpFdbStatus.1
Start monitoring Legacy Gandalf Technologies hub equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GANDALF-ENTERPRISE-MIB::bridgeDot1dTpFdbStatus OID value, configure state conditions and alerts, and monitor any Legacy Gandalf Technologies hub equipment from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.64 | gandalf | GANDALF-ENTERPRISE-MIB |
| 1.3.6.1.4.1.64.2 | gandalf_bridge | GANDALF-ENTERPRISE-MIB |
| 1.3.6.1.4.1.64.2.2 | bridgeTpObject | GANDALF-ENTERPRISE-MIB |
| 1.3.6.1.4.1.64.2.2.10 | bridgeTpFdbTable | GANDALF-ENTERPRISE-MIB |
| 1.3.6.1.4.1.64.2.2.10.1 | bridgeTpFdbEntry | GANDALF-ENTERPRISE-MIB |
| 1.3.6.1.4.1.64.2.2.10.1.3 | bridgeDot1dTpFdbStatus | GANDALF-ENTERPRISE-MIB |